Mitsubishi Electronics LDT52IV (MT819) manual 25 E, Network LAN Setup, Network Security

Page 25

NETWORK (LAN SETUP)

This screen allows you to set the settings necessary when the monitor is connected to a LAN.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”.

To set the address manually, set this to “OFF”.

IP ADDRESS

If the DHCP CLIENT is set to “OFF”, specify an IP address.

SUBNET MASK

If the DHCP CLIENT is set to “OFF”, specify the subnet mask.

DEFAULT GATEWAY

If the DHCP CLIENT is set to “OFF”, specify the default gateway.

If you are not using a default gateway, specify “0.0.0.0”.

DNS SERVER

Specify the DNS server address.

If you are not using a DNS server, specify “0.0.0.0”.

RESET

Clicking [Execute] returns all of the LAN SETUP settings to the factory-preset values except for the DNS SERVER setting.

Controlling the Monitor with a PC (LAN)

NETWORK (SECURITY)

This screen allows you to specify the security-related settings.

USER NAME / PASSWORD

Sets up a user name and password to restrict access to this monitor.

After entering a user name and password, click [Apply].

ACCEPT IP ADDRESS

You can limit access to this monitor by registering IP addresses of PCs that should have access.

To limit access, specify the option “From only speciﬁc IP addresses”. Otherwise, to allow access from any PC, specify “All IP Addresses”.

IP ADDRESS 1 to 3

If “ACCEPT IP ADDRESS” is set to “From only speciﬁc IP addresses”, enter the IP addresses that you want to allow.

TIPS

•The USER NAME and PASSWORD can be up to 8 alphanumeric characters or symbols.

•To cancel the user name and/or password after it has been set, make the box empty and click [Apply].

Downloaded From TV-Manual.com Manuals

25 E

Image 25

Contents Operation Guide Contents Mute Basic OperationMenu DisplayWide Zoom Normal Basic Operation „Switching the screen sizeDot by Dot Cut offDisplaying the menu screen Menu Items„Example of operation „Menu screen displayMenu item details „SETUP„SCREEN „PICTURE„OPTION „PIP/PbyP „ENLARGE PC input„Dual screen display „Enlarge Power„SCHEDULE ENLARGE-POS„Automatic adjustment Adjustments for PC screen display„Screen display for adjustment „ADVANCED items AV input See11 E Controlling the Monitor with a PC RS-232C Communication procedurePC connection Communication conditions„Response code format 13 E„ID numbers Wait ← Volume settings for all monitors are returned „Repeater control command15 E Controlling the Monitor with a PC RS-232C „Repeater controlPower control/Input mode selection RS-232C command tableHow to read the command table Controlling the Monitor with a PC RS-232CControlling the Monitor with a PC RS-232C Picture menu 17 EAudio menu Option menu Controlling the Monitor with a PC RS-232C Setup menu19 E Image Position Epos settingHorizontal orientation Vertical orientation Controlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menuOthers Controlling the Monitor with a PC LAN Settings to connect to a LAN21 E „ To set on the monitor Default Gateway 0.0 This monitor is factory preset as shown below IP Address Controlling the Monitor with a PC LAN „ To set from a PC Controlling with a PC 23 EControlling the Monitor with a PC LAN „ Basic operation„ Information Standby mode, Power on is the operation available„ Control 25 E „ Network LAN Setup„ Network Security „ Mail Originator „ Network General„ Mail Recipient 27 E„ Mail Periodical URL Information „ Service & Support URL InformationSpecify the condition to display the URL 29 E M ONorth America Mitsubishi Contact Information