Mitsubishi Electronics LDT52IV (MT819) manual Contents

Page 2

Contents

Basic Operation	3
Menu Items	5
Displaying the menu screen	5
Menu item details	6
Adjustments for PC screen display	10
Initialization (Reset)/Functional Restriction Setting...	11
Controlling the Monitor with a PC (RS-232C)	12
PC connection	12
Communication conditions	12
Communication procedure	12
RS-232C command table	16
Controlling the Monitor with a PC (LAN)	21
Settings to connect to a LAN	21
Controlling with a PC	23

This guide contains instructions regarding operation, settings, and similar details.

For instructions regarding connection and installation, refer to the included Operation Manual.

Manual Scope

-Microsoft, Windows and Internet Explorer are registered trademarks of Microsoft Corporation.

-HDMI, the HDMI Logo and High-Deﬁnition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

-Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

-This product comes with RICOH Bitmap Fonts produced and sold by RICOH COMPANY, LTD.

-All other brand and product names are trademarks or registered trademarks of their respective holders.

-Language of OSD menu used in this manual is English by way of example.

-Illustrations in this manual may not exactly represent the actual product or display.

-This manual assumes use in horizontal orientation, except where speciﬁcally noted.

Downloaded From TV-Manual.com Manuals

E 2

Image 2

Contents Operation Guide Contents Menu Basic OperationMute DisplayDot by Dot Basic Operation „Switching the screen sizeWide Zoom Normal Cut off„Example of operation Menu ItemsDisplaying the menu screen „Menu screen display„SCREEN „SETUPMenu item details „PICTURE„OPTION „Dual screen display „ENLARGE PC input„PIP/PbyP „SCHEDULE Power„Enlarge ENLARGE-POS„Screen display for adjustment Adjustments for PC screen display„Automatic adjustment „ADVANCED items AV input See11 E PC connection Communication procedureControlling the Monitor with a PC RS-232C Communication conditions„ID numbers 13 E„Response code format Wait ← 15 E „Repeater control commandVolume settings for all monitors are returned Controlling the Monitor with a PC RS-232C „Repeater controlHow to read the command table RS-232C command tablePower control/Input mode selection Controlling the Monitor with a PC RS-232CAudio menu 17 EControlling the Monitor with a PC RS-232C Picture menu Controlling the Monitor with a PC RS-232C Setup menu Option menuHorizontal orientation Vertical orientation Image Position Epos setting19 E Others Initialization/Functional Restriction Setting Function menuControlling the Monitor with a PC RS-232C PIP/PbyP menu 21 E Settings to connect to a LANControlling the Monitor with a PC LAN „ To set on the monitorControlling the Monitor with a PC LAN „ To set from a PC This monitor is factory preset as shown below IP AddressDefault Gateway 0.0 Controlling the Monitor with a PC LAN 23 EControlling with a PC „ Basic operation„ Control Standby mode, Power on is the operation available„ Information „ Network Security „ Network LAN Setup25 E „ Network General „ Mail Originator„ Mail Periodical 27 E„ Mail Recipient Specify the condition to display the URL „ Service & Support URL InformationURL Information M O 29 EMitsubishi Contact Information North America