OSM |
| Setting |
|
|
|
|
|
|
|
| |
PICTURE | BRIGHTNESS | Adjusts the overall image and background brightness. Press + or - to adjust. | |
|
|
|
|
| CONTRAST | Adjusts the image brightness in relationship to the background. Press + or - to adjust. | |
|
|
| Note: The sRGB picture mode is standard and cannot be changed. |
|
|
|
|
| SHARPNESS | Adjusts the crispness of the image. Press + or - to adjust. | |
|
|
|
|
| BLACK LEVEL | Adjusts the image brightness in relationship to the background. Press + or - to adjust. | |
|
|
|
|
| TINT* | Adjusts the tint of the screen. Press + or - to adjust. | |
| INPUT HDMI, DVD/HD, VIDEO, TV only |
| |
|
|
|
|
| COLOR* | Adjusts the color depth of the screen. Press + or - to adjust. | |
| INPUT HDMI, DVD/HD, VIDEO, TV only |
| |
|
|
|
|
| COLOR TEMPERATURE | Adjusts the color temperature of the entire screen. A low color temperature will make the | |
|
|
| screen reddish. A high color temperature will make the screen bluish. |
|
|
| Note: The sRGB picture mode is set to a predefined 6500 K standard and cannot be |
|
|
| changed. |
|
|
|
|
| COLOR CONTROL | Adjusts the levels of the Red, Yellow, Green, Cyan, Blue, Magenta and Saturation. | |
| INPUT DVI, VGA, RGB/HV, HDMI only | Note: The sRGB picture mode is standard and cannot be changed. | |
|
|
|
|
| GAMMA SELECTION | Select a display gamma for best picture quality. | |
|
|
|
|
|
| NATIVE | Gamma correction is handled by the LCD panel. |
|
|
|
|
|
| 2.2 | Typical display gamma for use with a PC. |
|
|
|
|
|
| 2.4 | Good for video (TV, DVD, etc.) |
|
|
|
|
|
| S GAMMA | Special gamma for certain types of movies. Raises the dark parts and lowers the light parts |
|
|
| of the image. |
|
|
|
|
|
| DICOM SIM. | DICOM GSDF curve simulated for LCD type. |
|
|
|
|
|
| PROGRAMMABLE | A programmable gamma curve can be loaded using NEC software. |
|
|
|
|
| ADAPTIVE CONTRAST* | Sets the level of adjustment for dynamic contrast. | |
| INPUT HDMI, DVD/HD, VIDEO, TV only |
| |
|
|
|
|
|
| OFF |
|
|
|
|
|
|
| MID |
|
|
|
|
|
|
| HIGH |
|
|
|
|
|
| MOVIE SETTINGS* |
| |
| INPUT HDMI, DVD/HD, VIDEO, TV only |
| |
|
|
|
|
|
| NOISE REDUCTION | Adjusts the amount of noise reduction. Press + or - to adjust. |
|
|
|
|
|
| FILM MODE | Selects Film mode. |
|
|
|
|
| PICTURE RESET | Resets the following settings within the PICTURE menu back to factory setting: | |
|
|
| BRIGHTNESS, CONTRAST, SHARPNESS, BLACK LEVEL, TINT, COLOR, COLOR |
|
|
| TEMPERATURE, COLOR CONTROL , GAMMA SELECTION, ADAPTIVE CONTRAST, |
|
|
| MOVIE SETTINGS. |
|
|
| |
|
|
| |
ADJUST | AUTO SETUP | Automatically adjusts screen size, H position, V position, Clock, Clock Phase, White Level, | |
| INPUT VGA, RGB/HV only | and Black Level. | |
|
|
|
|
| AUTO ADJUST | H Position, V Position and Clock Phase are adjusted automatically upon power on. | |
| INPUT VGA, RGB/HV only |
| |
|
|
|
|
| H POSITION | Controls the horizontal position of the image within the Display area of the LCD. | |
|
|
| Press + to move right. Press - to move left. |
|
|
|
|
| V POSITION | Controls the vertical position of the image within the Display area of the LCD. | |
|
|
| Press + to move up. Press - to move down. |
|
|
|
|
| CLOCK | Press + to expand the width of the image on the right of the screen. | |
| INPUT VGA, RGB/HV only | Press - to narrow the width of the image on the left. | |
|
|
|
|
| CLOCK PHASE | Adjusts the visual ÒnoiseÓ on the image. | |
| INPUT VGA, RGB/HV, DVD/HD only |
| |
|
|
|
|
*: The product you purchased may not have this feature.