| OSM RESET | Resets the following settings within the OSM menu back to factory setting: | |
|
|
| OSM TURN OFF, OSM POSITION, INFORMATION OSM, OSM TRANSPARENCY. |
|
|
|
|
|
|
|
|
MULTI DISPLAY | MONITOR ID | Sets the monitor ID number from | |
|
|
|
|
| IR CONTROL | Selects the mode of the monitor for use with the | |
|
|
| |
|
|
|
|
|
| NORMAL | The monitor will be controlled normally by wireless remote controller. |
|
|
|
|
|
| PRIMARY | Choose ÒPRIMARYÓ for the first monitor within an |
|
|
|
|
|
| SECONDARY | Choose ÒSECONDARYÓ for all subsequent monitors within an |
|
|
|
|
|
| LOCK | Prevents the monitor from being controlled by wireless remote controller. To return to normal |
|
|
| operation, press the ÒDISPLAYÓ button on the remote controller for 5 seconds. |
|
|
|
|
| TILE MATRIX | Allows one image to be expanded and displayed over multiple screens (up to 25) through a | |
|
|
| distribution amplifier. |
|
|
|
|
|
| H MONITORS | Number of monitors arranged horizontally. |
|
|
|
|
|
| V MONITORS | Number of monitors arranged vertically. |
|
|
|
|
|
| POSITION | Select which section of the tiled image to be displayed on the monitor. |
|
|
|
|
|
| TILE COMP | Turns the TILE COMP feature on. |
|
|
|
|
|
| ENABLE | Enables Tile Matrix. |
|
|
|
|
| POWER ON DELAY | Adjusts the delay time between being in ÒstandbyÓ mode and entering Òpower onÓ mode. | |
|
|
| ÒPOWER ON DELAYÓ can be set between 0 and 50 seconds. |
|
|
|
|
| MULTI DISPLAY RESET | Resets the following settings within the MULTI DISPLAY menu back to factory setting: | |
|
|
| MONITOR ID, IR CONTROL, TILE MATRIX, POWER ON DELAY. |
|
|
|
|
|
|
|
|
DISPLAY | POWER SAVE | Sets how long the monitor waits to go into power save mode after a lost signal. | |
PROTECTION |
|
|
|
|
|
|
|
| STANDBY MODE | Lowers power consumption. | |
|
|
| Note: |
|
|
|
|
| HEAT STATUS | Displays status of the COOLING FAN, BRIGHTNESS and TEMPERATURE. | |
|
|
|
|
| FAN CONTROL | Cooling fan reduces the temperature of the display. | |
|
|
|
|
| SCREEN SAVER | Use the SCREEN SAVER function to reduce the risk of Image Persistence. | |
|
|
|
|
|
| GAMMA | The display gamma is changed and fixed when ÒONÓ is selected. |
|
|
|
|
|
| BRIGHTNESS | The brightness is decreased when ÒONÓ is selected. |
|
|
|
|
|
| MOTION | The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) |
|
|
| at user determined intervals. |
|
|
|
|
| SIDE BORDER COLOR | Adjusts the color of the side borders when a 4:3 image is displayed. | |
|
|
| Press + button, the bar will become lighter. |
|
|
| Press - button, the bar will become darker. |
|
|
|
|
| AUTO BRIGHTNESS | Adjusts the brightness level according to the input signal. | |
| INPUT DVI, VGA, RGB/HV only |
| |
|
|
|
|
| CHANGE SECURITY | Allows the security password to be changed. | |
| PASSWORD | The factory preset password is 0000. | |
|
|
|
|
| SECURITY LOCK | Locks the security password. | |
|
|
|
|
| DISPLAY PROTECTION | Resets the following settings within the Picture menu back to factory setting: | |
| RESET | POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER | |
|
|
| COLOR, AUTO BRIGHTNESS. |
|
|
| |
|
|
|
|
ADVANCED | INPUT DETECT | Selects the method of input detection the monitor uses when more than two input devices | |
OPTION | except TV input | are connected. | |
|
|
|
|
|
| NONE | The Monitor will not search the other video input ports. |
|
|
|
|
*: The product you purchased may not have this feature.
English