3. Ventilation Requirements
When mounting in an enclosure or in a recessed area allow heat to disperse, leave space between surrounding the monitor and surrounding objects allow heat to disperse, as shown in Figure 6.
Figure 6
4. Main Power Switch Cover
The Main Switch Cover will be attached in one of two ways, depending on the orientation of the monitor. When the Main Switch Cover is used when the stand is attached the longer side of the cover will go underneath. When used without the stand, the short side of the cover will go underneath (Figure 7).
5. Prevent Tipping
When using the display with the Tabletop Stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor (approx. M40: 32.6Kg/M46: 39.3Kg) in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamp and screw (Figure 8).
Screw Holes
250mm |
Cord or chain
Clamp
Screw
Figure 8
Before attaching the LCD monitor to the wall, make sure that the wall can support the weight of the monitor.
Be sure to remove the cord or chain from the wall before moving the LCD.
English
Main switch cover (with stand)
The longer side of the cover is toward the bottom of the display.
Main switch cover (without stand)
The shorter side of the cover is toward the bottom of the display.
Figure 7