NEC M60, M40 Connecting to a Macintosh Computer, Connect the LCD Monitor to Macintosh, English-15

Connecting to a Macintosh Computer

Connecting your Macintosh computer to your LCD monitor will enable you to display your computerÕs screen image. Some video cards or drivers may not display images correctly.

Connect the LCD Monitor to Macintosh

¥To connect the VGA IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin).

¥To connect the RGB/HV IN connector (BNC) on the LCD monitor, use the signal cable available separately (mini D-sub 15 pin to BNC x 5).

¥If you use with a Macintosh PowerBook, set ÒMirroringÓ to Off.

Refer to your MacintoshÕs ownerÕs manual for more information about your computerÕs video output requirements and any special identification or configuring your monitorÕs image and monitor may require.

¥The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select [IN1], [IN2] or [IN3] from the AUDIO INPUT button.

LCD monitor

To RGB/HV IN

BNC x 5

LCD monitor (second monitor)

BNC x 5
BNC x 5
MiniDsub-	15pin

To audio output

To analog RGB output

Mini D-sub 15 pin

Macintosh

English

English-15