Terminal Panel

In Out

1AC IN connector

Connects with the supplied power cord.

To input digital RGB signals from a computer or HDTV device having a digital RGB output.

* This connector does not support analog input.

3VGA IN (mini D-Sub 15 pin)

To input analog RGB signals from a personal computer or other RGB equipment.

To input analog RGB signals or signals from other RGB equipment.

This is also to connect equipment such as a DVD player and HDTV laser disk player. A Sync-on-Green signal can be connected to the G connector.

To outputs the signal from the RGB/HV IN connector to an input on a separate device.

6HDMI connector*

To input digital HDMI signals.

7DVD/HD connector (RCA)*

To output the audio signal from the AUDIO IN 1, 2, 3, HDMI, and TV jack to an external device (stereo receiver, amplifier, etc.).

10VIDEO INPUT/OUTPUT Connector*

VIDEO IN connector (BNC and RCA): To input a composite video signal. BNC and RCA connectors are not available at the same time (Use only one input).

VIDEO OUT connector (BNC): To output the composite video signal from the VIDEO IN connector.

S-VIDEO IN connector (DIN 4 pin): To input the S-video (Y/C separate signal). See page 28, S-VIDEO MODE SETTING.

11EXTERNAL CONTROL (mini D-Sub 9 pin)

IN connector: Connect RS-232C input to external equipment such as a PC in order to control RS-232C functions.

Out connector: Connect RS-232C output. To connect to multiple Multeos monitors via daisy RS-232C Chain.

To output the audio signal from AUDIO 1, 2, 3, HDMI and TV jack.

Note: This speaker terminal is for 15W + 15W (8 ohm) speaker.

13Option board slot

Connecting equipment such as a DVD player, HDTV device, or Laser disc player.

To input audio signal from external equipment such as a computer, VCR or DVD player.

Slot for board accessories. Please contact your supplier for detail information.

14Antenna Input*

Connects to antenna or to TV signal.

*: The product you purchased may not have this feature.

English-6