Siemens manual Attaching the CP 343-1 to Industrial Ethernet

english

2.3Attaching the CP 343-1 to Industrial Ethernet

The CP 343-1 can be attached to Industrial Ethernet using a

STransceiver with an AUI interface

CP 343–1

SF

RUN

STOP

RUN

STOP

R

Transceiver cable (drop cable) 727-1

Transceiver

Figure 3 Attaching the CP 343-1 to Industrial Ethernet with AUI/Transceiver

The CP 343-1 generates and supplies the 13 V power required by the transceiver.

SIndustrial Twisted Pair attachment, for example using a Optical Switch Module (OSM) or hub.

When using the Industrial Ethernet installation cable shown in Figure 4, the CP 343-1 automatically switches over to Twisted Pair. Information about the pinout can be found at the end of this section.

With Industrial Twisted Pair, cables with a length of up 100 m can be installed between the CP and Optical Switch Module (OSM).

Product information CP 343–1	13
C79000–Z8964–C038–05