Siemens CP 343-1 manual Safety Guidelines, Copyright E Siemens AG 1998..1999 All rights reserved

Page 4

english

Notes for the Reader

Safety Guidelines

!

!

!

This manual contains notices which you should observe to ensure your own personal safety, as well as to protect the product and connected equipment. These notices are highlighted in the manual by a warning triangle and are marked as follows according to the level of danger:

Note

draws your attention to particularly important information on the product, handling the product, or to a particular part of the documentation.

Caution

indicates that minor personal injury or property damage can result if proper pre- cautions are not taken.

Warning

indicates that death, severe personal injury or substantial property damage can result if proper precautions are not taken.

Danger

indicates that death, severe personal injury or substantial property damage will result if proper precautions are not taken.

Copyright E Siemens AG 1998..1999 All rights reserved

Disclaimer of Liability

The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights createdby patent grant or registration of a utility model or design, are reserved.

Siemens AG

A&D

Industrial Automation Systems

Postfach 4848, D-90327 Nürnberg

2

We have checked the contents of this manual for agreement with the hardware and software described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However, the data in this manual are reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for improvementare welcomed.

Technical data subject to change.

Product information CP 343–1

C79000–Z8964–C038–05

Image 4
Contents Stand/ Dated/ Edition/ Versione/ Versiòn 06/99 Produktinformation6GK7 343-1BA00-0XE0 Attenzione Contents Safety Guidelines Copyright E Siemens AG 1998..1999 All rights reservedApplication DesignConfiguration CharacteristicsServices Extended Functions Compared with Version Requirements General OperationRequirements ISO Transport Connections Characteristics of S7 Communication Characteristics of ISO Transport ConnectionsPerformance Data Reaction Times of ISO Transport ConnectionsCP Operating Mode Displays and Mode SelectorLED Displays Controlling the Operating Mode Mode SelectorDownloading Firmware Further Information on OperationGroup status 8183 on the FC call interface Installation Module AccessoriesSteps in Installation ProcedurePG/PC Connection Attaching the CP 343-1 to Industrial Ethernet Optical Switch Modul OSM Technical Data General Technical DataConnector for Industrial Ethernet PinoutInstallation Guidelines Product nameEU Directive EMC89/336/EEC Area of ApplicationContains detailed information Order Numbers90713 Fürth Dear customer
Related manuals
Manual 56 pages 42.23 Kb