english
1 The CP 343-1 Communications Processor
Application
The CP 343-1 communications processor is designed for operation in an
S7-300 programmable logic controller. It allows the S7-300 to be attached to Industrial Ethernet.
LED displays
Mode selector
AUI/ITP interface 15-pin sub D with sliding locking mechanism
Figure 1 CP 343-1
Design
The module has been designed to match the components of the S7-300 programmable logic controller and has the following features:
SDouble-width module for simple installation in the S7-300 rack.
SThe operator controls and displays are all located on the front panel.
SNo fan necessary.
SDirect backplane bus connection of the modules via accompanying backplane module connectors.
S15-pin sub D female connector with sliding locking mechanism for attaching the CP 343-1 to Industrial Ethernet (automatic switchover between the AUI interface and Twisted Pair interface).
Product information CP 343–1 | 3 |
C79000–Z8964–C038–05 | |
