Siemens CP 343-1 manual Characteristics, Configuration, Services

english

Configuration

You can configure the CP 343–1 via MPI or LAN/Industrial Ethernet. You re- quire STEP 7 with the following version of NCM S7 for Industrial Ethernet (abbreviated to ”NCM IE” below):

Table 1

Version STEP7/NCM IE

V2.x to V5.x

V5.x + SP2 or higher

Functionality of the CP 343–1

The same functionality is available as with the previous versions of the CP.

SConfiguration data created with these STEP 7 or NCM versions can be downloaded to the CP 343–1.

The full functionality including the extended functions as listed in Section 1.1 can be used.

Information about the required service pack (SP2) is available on the Internet at: http://www.ad.siemens.de/csi/net

1.1Characteristics

Services

The CP 343-1 supports the following communication services:

SS5-compatible communication with

–SEND/RECEIVE interface via ISO transport connections

–FETCH/WRITE services (passive; according to the S5 protocol) via ISO transport connections and ISO-on-TCP connections

SS7 communication with

–PG functions

–Operator control and monitoring functions

–Data exchange using communication function blocks

PG functions:

Using the PG functions, modules such as the FM 354 or FM 355 can be accessed via the CP (“extended” PG functions).

4Product information CP 343–1

C79000–Z8964–C038–05