Pioneer DEH-1150MP Installation, DIN front/rear mount, DIN Front-mount, Removing the unit

Page 15

 

Black plate (15,1)

 

Section

Installation

04

Important

!Check all connections and systems before final installation.

!Do not use unauthorized parts. Use of un- authorized parts may cause malfunctions.

!Consult your dealer if installation requires dril- ling of holes or other modifications to the vehi- cle.

!Do not install this unit where :

—it may interfere with operation of the vehi- cle.

—it may cause injury to a passenger as a re- sult of a sudden stop.

!The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.

!Optimum performance is obtained when the unit is installed at an angle of less than 60°.

!When installing, to ensure proper heat disper- sal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.

space behind the unit, use factory supplied

English

 

mounting sleeve.

 

 

2

Secure the mounting sleeve by using a

 

screwdriver to bend the metal tabs (90°)

 

into place.

 

 

3

Install the unit.

 

 

Dashboard

Rubber bush

 

Mounting sleeve

Screw

Removing the unit

1Extend top and bottom of the trim ring outwards to remove the trim ring. (When reattaching the trim ring, point the side with a groove downwards and attach it.)

DIN front/rear mount

This unit can be properly installed either from “Front” (conventional DIN front-mount) or “Rear” (DIN rear-mount installation, utilizing threaded screw holes at the sides of unit chas- sis). For details, refer to the following installa- tion methods.

Trim ring

!It becomes easy to remove the trim ring if the front panel is released.

2Insert the supplied extraction keys into both sides of the unit until they click into place.

3Pull the unit out of the dashboard.

DIN Front-mount

Installation with the rubber bush

1 Insert the mounting sleeve into the dashboard.

When installing in a shallow space, use a sup- plied mounting sleeve. If there is enough

En 15

<QRD3017-A/N>15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents QRD3017-A DEH-1150MPGBefore You Start About this unit ContentsTheft Before You Start About this unitVisit our website Protecting your unit fromBefore You Start Use and care of the remote controlUsing the remote control Installing the batteryOperating this unit Remote controlDisplay indication Power ON/OFFAdjusting the volume Basic OperationsBuilt-in Player Operating this unit TunerEject Repeating playPlaying tracks in random order Scanning tracks or foldersDisplaying text information on disc Pausing disc playbackUsing compression and BMX Searching every 10 tracks in the current disc or folderAudio Adjustments Setting the clock Adjusting initial settingsSetting the FM tuning step Setting the AM tuning stepPress Source to select AUX as the source Switching the auxiliary settingUsing the AUX source Selecting AUX as the sourceVehicles with a 12-volt battery and negative grounding Control signal is output through blue/white EnglishConnections Connections Connection diagram DIN Front-mount InstallationInstallation with the rubber bush DIN front/rear mountPending on the shape of screw holes in the bracket DIN Rear-mountHandling guideline of discs and player Additional Information Error messagesExample of a hierarchy Additional InformationDual Discs Compressed audio filesAdpcm MP3WAV MS AdpcmAdditional Information Specifications Funciones básicas Encendido y apagado ContenidoAntes de comenzar Acerca de esta unidad Protección del producto contra roboAntes de comenzar Acerca de esta unidad Visite nuestro sitio WebProtección del producto contra robo Antes de comenzar Uso y cuidado del mando aDistancia QRD3017-A/N24 Unidad principal Utilización de esta unidad Qué es cada cosaIndicaciones de pantalla Encendido y apagado Utilización de esta unidadFunciones básicas Mando a distanciaPara escuchar la radio Ajuste del volumenSintonizador Selección de una fuenteAlmacenamiento de las frecuencias de radio más fuertes Reproductor incorporadoAlmacenamiento y recuperación de frecuencias Sintonización de señales fuertesBand Repetición de reproducciónReproducción de las pistas en orden aleatorio FLD Repite la carpeta actualBúsqueda cada 10 pistas en el disco o carpeta actual Exploración de pistas o carpetasPausa de la reproducción de un disco Uso de la compresión y BMXAjuste de las curvas de Ajustes de audioUso del ajuste del balance Uso del ecualizadorAjuste de los niveles de la fuente Configuración de los ajustes inicialesOtras funciones Ajuste de la sonoridadSelección de AUX como la fuente Cambio del ajuste de un equipo auxiliarActivación y desactivación de la visualización del reloj Uso de la fuente AUXConexiones Conexiones Diagrama de conexión Instalación en la arandela de goma InstalaciónMontaje delantero/ posterior DIN Montaje delantero DINMontaje trasero DIN Cuando contacte con su proveedor o con el Discos y del reproductorDiscos dobles Información adicionalArchivos de audio ComprimidosFormato compatible Lineal PCM Lpcm Compatibilidad con audio comprimidoInformación adicional Especificaciones Conteúdo Antes de utilizar este produto Sobre esta unidade Visite o nosso websitePioneer Corporation em nosso site da Utilização e cuidados do controle remoto Antes de utilizar este produtoQRD3017-A/N45 Funcionamento desta unidade Introdução aos botões Unidade principalControle remoto Ligar e desligar Funcionamento desta unidadeOperações básicas Indicação no displaySintonia em sinais fortes Ajuste do volumeGire Volume para ajustar o nível do som Como ouvir o rádioVado Player incorporadoArmazenamento das freqüências mais fortes de transmissão Reprodução de um discoPausa na reprodução de disco Repetição da reproduçãoReprodução de faixas em ordem aleatória Exploração de faixas ou pastasPressione a ou b para selecionar o seu ajuste favorito Utilização de compressão e BMXBusca a cada 10 faixas no disco ou na pasta atual Visualização de informações de texto do discoFuncionamento desta unidade Ajustes de áudio Ajuste do passo de sintonia FM Outras funçõesDefinição dos ajustes iniciais Ajuste da horaSeleção de AUX como a fonte Ajuste do passo de sintonia AMAtivação do ajuste auxiliar Utilização da fonte AUXEstiver equipado com uma antena acoplada ConexõesConexões Diagrama de conexão Instalação com bucha de borracha InstalaçãoMontagem dianteira/ /traseira DIN Montagem dianteira DINMontagem traseira DIN Puxe a unidade para fora do painelMm × 9 mm, dependendo do formato do orifício no suporte Ao entrar em contato com o revendedor ou a Dos discos e do playerExemplo de uma hierarquia Informações adicionaisDiscos duais Arquivos de áudio compactadosFormato compatível PCM linear Lpcm Compatibilidade com compressão de áudioMentos Informações adicionais EspecificaçõesGeral Áudio電源ON/OFF 使用壓縮與BMXDIN前／後座 DIN前座 DIN後座 01 開始使用前 關於本機料，請至 本機的防盜拆卸前面板 使用遙控器 開始使用前遙控器的使用與保養 安裝前面板遙控器 02 操作本機 鈕功能操作本機 調諧器基本操作 內置式播放器 02 操作本機在目前光碟或資料夾中以10首曲目為 單位搜尋 依隨機順序播放曲目掃描曲目或資料夾 使用壓縮與BMX其他功能 音訊調整切換輔助設定 設定時鐘設定FM調頻間隔 設定AM調頻間隔請使用規定額定值的保險絲。 請勿將揚聲器負極線直接接地。 請勿將多個揚聲器的負極線綑紮在一起。 03 連接接線圖 04 安裝 DIN前／後座DIN前座 DIN後座 壓縮音訊檔案 附加資訊 錯誤訊息雙面碟 碟片與播放器的操作指南Adpcm ） 附加資訊階層實例 壓縮音訊相容性QRD3017-A/N78 ﺕﺎﻔﺻﺍﻮﻤﻟﺍ ﺔﻴﻓﺎﺿﺇ ﺕﺎﻣﻮﻠﻌﻣLinear PCM LPCM، MS ﺔﻘﻓﺍﻮﺘﻤﻟﺍ ﺔﻐﻴﺼﻟﺍ ﺔﻃﻮﻐﻀﻣ ﺕﻮﺻ ﺕﺎﻔﻠﻣﻁﻮﻐﻀﻣ ﻲﻌﻤﺳ ﻖﻓﺍﻮﺗ ﻲﻣﺮﻬﻟﺍ ﻯﻮﺘﺴﻤﻟﺍ ﻰﻠﻋ ﻝﺎﺜﻣﺄﻄﺨﻟﺍ ﺕﺍﺭﺎﻄﺧﺇ ﺔﺟﻭﺩﺰﻣ ﺕﺎﻧﺍﻮﻄﺳﺍﺔﺻﺎﺨﻟﺍ ﺕﺍﺩﺎﺷﺭﺇ ﻊﻣ ﻞﻣﺎﻌﺘﻟﺍ ﻞﻐﺸﻤﻟﺍﻭ ﺕﺎﻧﺍﻮﻄﺳﻻﺎﺑ ﺐﻴﻛﺮﺘﻟﺍ ﺩﺎﻨﺳ ﺐﻴﻛﺮﺘﻟﺍDIN ﺔﻴﻔﻠﺨﻟﺍ ﺐﻴﻛﺮﺘﻟﺍ ﺔﻨﺿﺎﺣ ﺕﺍﺩﺍﺪﻌﻟﺍ ﺔﺣﻮﻟ ﺝﺭﺎﺧ ﺯﺎﻬﺠﻟﺍ ﺐﺤﺳﺍﺯﺎﻬﺠﻟﺍ ﻉﺰﻧ DIN ﺔﻴﻔﻠﺧ/ﺔﻴﻣﺎﻣﺃ ﺐﻴﻛﺮﺗ ﺔﻨﺿﺎﺣDIN ﺔﻴﻣﺎﻣﻷﺍ ﺐﻴﻛﺮﺘﻟﺍ ﺔﻨﺿﺎﺣ ﺔﻴﻃﺎﻄﻣ ﺔﺒﻠﺟ ﻊﻣ ﺐﻴﻛﺮﺘﻟﺍﻞﻴﺻﻮﺘﻟﺍ ﻂﻄﺨﻣ ﺕﻼﻴﺻﻮﺘﻟﺍﺭﺎﻴﺗ ﺖﻟﻮﻓ ١٢ ﺃ ﻡ ٣٠٠ ﺓﺭﺎﻴﺴﻠﻟ ﻲﺋﺎﻘﻠﺘﻟﺍ ﻲﺋﺍﻮﻬﻟﺍ ﻞﺣﺮﻣ ﻲﻓ ﻞﺒﻜﻟﺍ ﺪﻳﺪﻤﺗ ﺐﺠﻳ ،ﻙﺮﺤﻤﻟﺍ ﻞﻴﻐﺸﺗ ﺡﺎﺘﻔﻣ ﻊﺿﻭ ﻰﻠﻋ ACCﺔﻴﻧﺪﻌﻣ ﺀﺍﺰﺟﺃ ﺎﻬﻴﻓ ﺲﻣﻼﺗ ﻲﺘﻟﺍ ﺪﻌﻘﻤﻟﺍ ﻚﻜﺳ ﻭﺃ ﺱﻭﺮﺘﻟﺍﻱﻮﻧﺎﺜﻟﺍ ﺭﺪﺼﻤﻟﺍ ﻝﺎﻤﻌﺘﺳﺇ ﺯﺎﻬﺠﻟﺍ ﺍﺬﻫ ﻞﻴﻐﺸﺗAM ﺔﺟﻮﻤﻟﺍ ﺔﻔﻟﺍﻮﻣ ﺔﻠﺣﺮﻣ ﺔﺌﻴﻬﺗ ﻱﻮﻧﺎﺜﻟﺍ ﻊﺿﻮﻟﺍ ﻞﻳﻮﺤﺗﺭﺪﺼﻤﻟﺍ ﺕﺎﻳﻮﺘﺴﻣ ﻂﺒﺿ ﻯﺮﺧﺃ ﻒﺋﺎﻇﻭﺯﺎﻬﺠﻟﺍ ﺍﺬﻫ ﻞﻴﻐﺸﺗ ﺕﻮﺼﻟﺍ ﻮﻠﻋ ﻂﺒﺿﻥﺯﺍﻮﻤﻟﺍ ﺕﺎﻴﻨﺤﻨﻣ ﻂﺒﺿ ﺕﻮﺼﻟﺍ ﻂﺒﺿ ﺕﺎﻴﻠﻤﻋﻥﺯﺍﻮﺘﻟﺍ ﻂﺒﺿ ﻝﺎﻤﻌﺘﺳﺇ ﻥﺯﺍﻮﻤﻟﺍ ﻝﺎﻤﻌﺘﺳﺍﻰﻠﻋ ﺕﺍﺭﺎﺴﻣ ١٠ ﻞﻛ ﺚﺤﺒﻟﺍ ﺎًﺘﻗﺆﻣ ﺔﻧﺍﻮﻄﺳﻻﺍ ﺓﺪﻫﺎﺸﻣ ﻑﺎﻘﻳﺇﺭﺮﻜﺘﻤﻟﺍ ﻉﺎﻤﺘﺳﻹﺍ BMX ﻭ ﻂﻐﻀﻟﺍ ﻝﺎﻤﻌﺘﺳﺇ ﻲﺋﺍﻮﺸﻋ ﺐﻴﺗﺮﺘﺑ ﺕﺍﺭﺎﺴﻤﻠﻟ ﻉﺎﻤﺘﺳﻻﺍﻯﻮﻗﻷﺍ ﺚﺒﻟﺍ ﺕﺍﺩﺩﺮﺗ ﻦﻳﺰﺨﺗ ﻲﻠﺧﺍﺪﻟﺍ ﻞﻐّ ﺸﻤﻟﺍ ﺔﻧﺍﻮﻄﺳﺍ ﻞﻴﻐﺸﺗﺚﺒﻟﺍ ﺕﺍﺩﺩﺮﺗ ﺀﺎﻋﺪﺘﺳﺍﻭ ﻦﻳﺰﺨﺗ ﺔﻳﻮﻘﻟﺍ ﺕﺍﺭﺎﺷﻹﺍ ﻰﻠﻋ ﺔﻔﻟﺍﻮﻤﻟﺍﺔﻴﺳﺎﺳﻷﺍ ﺕﺎﻴﻠﻤﻌﻟﺍ ﻒﻟﺍﻮﻤﻟﺍﺀﺍﺰﺟﻷﺎﺑ ﻒﻳﺮﻌﺘﻟﺍ ﺪﻌﺑ ﻦﻋ ﻢﻜﺤﺘﻟﺍ ﺓﺪﺣﻭﺔﻴﺴﻴﺋﺮﻟﺍ ﺓﺪﺣﻮﻟﺍ ﺪﻌﺑ ﻦﻋ ﻢﻜﺤﺘﻟﺍ ﺓﺪﺣﻭ ﻝﺎﻤﻌﺘﺳﺍ ﺃﺪﺒﺗ ﻥﺃ ﻞﺒﻗﺪﻌﺑ ﻦﻋ ﻢﻜﺤﺘﻟﺍ ﺓﺪﺣﻭ ﻝﺎﻤﻌﺘﺳﺇ ﺎﻬﺑ ﺔﻳﺎﻨﻌﻟﺍﻭ ﺔﻴﻣﺎﻣﻷﺍ ﺔﺣﻮﻠﻟﺍ ﺐﻴﻛﺮﺗﺔﻴﻣﺎﻣﻷﺍ ﺔﺣﻮﻠﻟﺍ ﻉﺰﻧ ﺎﻨﻌﻗﻮﻣ ﺓﺭﺎﻳﺰﺑ ﻢﻗﺔﻗﺮﺴﻟﺍ ﻦﻣ ﻚﺗﺪﺣﻭ ﺔﻳﺎﻤﺣ ﺯﺎﻬﺠﻟﺍ ﺍﺬﻫ ﻝﻮﺣﺚﺒﻟﺍ ﺕﺍﺩﺩﺮﺗ ﺀﺎﻋﺪﺘﺳﺍﻭ ﻦﻳﺰﺨﺗ ﺕﺎﻳﻮﺘﺤﻤﻟﺍKokzx 08G00000 Meguro 1-CHOME, MEGURO-KU Tokyo 153-8654, Japan

DEH-1150MPG, DEH-1150MP specifications

The Pioneer DEH-1150MP and DEH-1150MPG are two versatile and robust car audio receivers that appeal to audiophiles and casual listeners alike. These models stand out due to their impressive feature sets, user-friendly interfaces, and advanced audio technologies, making them a popular choice for upgrading vehicle sound systems.

One of the key highlights of the DEH-1150MP series is its MP3 playback capability. Users can easily play their favorite digital music files from CD-Rs, CD-RWs, and USB devices, providing a significant upgrade over traditional CD-only players. The integrated CD player ensures compatibility with various formats, making it a versatile option for music lovers.

The DEH-1150MP and DEH-1150MPG come equipped with a front USB port and an auxiliary input. This allows for direct connections to smartphones and other external media devices, expanding the listener's options for audio input. With the ability to charge devices via USB, users can enjoy uninterrupted audio while keeping their gadgets powered.

Both models feature a built-in 50 watts x 4-channel amplifier, delivering powerful, clear sound across all frequencies. The advanced sound retriever technology optimizes compressed audio formats, enhancing sound quality and restoring the clarity that is often lost in digital compression. This feature ensures that listeners experience high-quality audio regardless of the source.

Another notable characteristic is the customizable display options. Users can select from a range of colors for illumination, creating a personalized look that matches their vehicle’s interior. Additionally, the easy-to-navigate buttons and an intuitive interface make operation straightforward, even while driving.

The DEH-1150MPG model adds another layer of convenience with its support for Android Music and various smartphone integration features. Users can navigate through their playlists, control playback, and access other device functionalities with ease.

The DEH-1150MP series also implements a built-in equalizer with predefined settings, allowing users to fine-tune their audio experience. Whether one prefers a bass-heavy sound or a balanced output, these settings enable customization to suit diverse listening preferences.

Overall, the Pioneer DEH-1150MP and DEH-1150MPG combine functionality, sound quality, and user-friendly features, making them ideal options for anyone looking to enhance their car audio experience. With their advanced audio technologies and versatile connectivity options, these receivers are sure to satisfy the musical needs of a wide range of users.
Top Page Image Contents