Pioneer DEH-3100UB Audio Adjustments, Introduction of audio, Using balance adjustment

			Black plate (21,1)
				Section
				03
	Audio Adjustments
				English
Introduction of audio		! When selecting FM as the source, you cannot
adjustments		switch to SRC LV ADJUST.
		! If you do not operate functions within about
1 Press MULTI-CONTROL to display the		30 seconds, the display automatically returns
main menu.		to the ordinary display.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-		Using balance adjustment
lect.
		You can change the fader/balance setting so
3 Turn MULTI-CONTROL to select the
		that it can provide the ideal listening environ-
audio function.		ment in all occupied seats.
Turn MULTI-CONTROL to switch between the		1 Use MULTI-CONTROL to select
audio functions in the following order.
FADER/BALANCE (balance adjustment)—		FADER/BALANCE in the audio function
PRESET EQUALIZER (equalizer recall)—		menu.
EQ SETTING 1 (equalizer adjustment)—		2 Press MULTI-CONTROL to display the
EQ SETTING 2 (equalizer fine adjustment)—
		setting mode.
LOUDNESS (loudness)—SW SETTING 1 (sub-
woofer on/off setting)—SW SETTING 2 (sub-		3 Press MULTI-CONTROL to select the seg-
woofer setting)—HIGH PASS FILTER (high
		ment you wish to set.
pass filter)—BASS BOOST (bass boost)—
		Press MULTI-CONTROL repeatedly to switch
SRC LV ADJUST (source level adjustment)
		between fader and balance.
4 Press MULTI-CONTROL to display the
		4 Turn MULTI-CONTROL to adjust speaker
setting mode of each function.
		balance.
# Push MULTI-CONTROL left to display the
		Front/rear speaker balance can be adjusted
function selection menu.
		between FAD F15 and FAD R15.
# Push and hold MULTI-CONTROL left to dis-
		Left/right speaker balance can be adjusted be-
play the main menu.
		tween BAL L15 and BAL R15.
5 Adjust the each function.		# You can also perform the same operations by
		pushing MULTI-CONTROL up or down.
	Notes	# FAD 0 is the proper setting when only two
		speakers are used.
! To return to the previous display, press
		# When the rear output setting is
	DISP/BACK/SCRL.	REAR SP :SUB W, adjusting the front/rear speak-
! To return to the main menu, press and hold		er balance is not effective. Refer to Setting the
	DISP/BACK/SCRL.	rear output and subwoofer controller on page
! To return to the ordinary display, press		26.
	BAND/ESC.

!When the subwoofer controller setting is

PREOUT:REAR, you cannot switch to	Using the equalizer
SW SETTING 1 (subwoofer on/off setting).
	The equalizer lets you adjust the equalization
(Refer to page 26.)
! You can select the SW SETTING 2 only when	to match the car’s interior acoustic character-
subwoofer output is turned on in	istics as desired.
SW SETTING 1.
		En 21
		<YRD5269-A/S>21