Pioneer DEH-2100IB owner manual Initial Settings, Other Functions

Section

02Operating this unit

4Turn MULTI-CONTROL to adjust the source volume.

+4 to –4 is displayed as the source volume is increased or decreased.

5Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been cancelled before determination, operation is settled.

Initial Settings

Adjusting initial settings

1Press SRC/OFF and hold until the unit turns off.

Switching the auxiliary setting

It is possible to use auxiliary device with this unit. Activate the auxiliary setting when using auxiliary device connected to this unit.

1Use MULTI-CONTROL to select AUX in the initial setting menu.

Refer to Adjusting initial settings on this page.

2Press MULTI-CONTROL to turn AUX on.

# To turn AUX off, press MULTI-CONTROL again.

Other Functions

Using the AUX source

2Press MULTI-CONTROL and hold until CLOCK SET appears in the display.

3Turn MULTI-CONTROL to select one of the initial settings.

CLOCK SET (clock)—AUX (auxiliary input)

# To return to the previous display, press

DISP/BACK/SCRL.

# To return to the main menu, press and hold

DISP/BACK/SCRL.

# To cancel initial settings, press BAND/ESC.

Setting the clock

You can connect an auxiliary device to this unit using a stereo mini plug cable.

%Insert the stereo mini plug into the input jack on this unit.

Selecting AUX as the source

%Press SRC/OFF to select AUX as the

source.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliary setting on this page.

Use these instructions to set the clock.

1Use MULTI-CONTROL to select CLOCK SET in the initial setting menu. Refer to Adjusting initial settings on this page.

2Press MULTI-CONTROL to display the setting mode.

3Press MULTI-CONTROL to select the seg- ment of the clock display you wish to set. Each time you press MULTI-CONTROL, one segment of the clock display is selected. Hour—Minute

As you select segments of the clock display, the selected segment blinks.

4Turn MULTI-CONTROL to put a clock right.

Turning the clock display on or off

You can turn the clock display on or off.

!Even when the sources are off, the clock display appears on the display.

%Press CLOCK to turn the clock display on or off.

Each press of CLOCK turns the clock display

on or off.

# The clock display disappears temporarily

when you perform other operations, but the clock display appears again after 25 seconds.

18 En