Jensen UV10 Audio Sub-menu Features, RDS Sub-menu Features, Bluetooth Sub-menu Features

UV10

Audio Sub-menu Features

Setting	Options	Function
DRC	Off	Employ the Dynamic Range
		Control for better playback for
	On
		low volumes.
Loudness	Off	Turn bass boost on/off
	On
Subwoofer	Off	Turn the subwoofer on/off.
	On
Sub Filter	80Hz	Selecting a crossover fre-
		quency sets a cut-off frequency
	120Hz
		of the subwoofer's LPF (low-
	160Hz	pass filter).
RDS Sub-menu Features
Setting	Options	Function
RDS	Off
	On
CR	Off
	On
Bluetooth Sub-menu Features
Setting	Options	Function
Bluetooth	Off	Disable Bluetooth function.
	On	Enable Bluetooth function.
Connect	Manual	Connect the last active mobile
		phone by touching the CONNECT
		icon when disconnected.
	Auto	Automatically connect when your
		paired phone is in range.
Auto Answer	Manual	Manually answer calls by touching
		the “call” button.
	Auto	The unit automatically answers all
		incoming calls.
Pairing Code		The default code is “1234”. Touch
		the keypad icon to open the keypad
		and enter the pairing code or pass
		key required for Bluetooth connec-
		tion to your mobile phone. Not all
		phones/devices require a pairing
		code. The default code is “0000” for
		many models.

Rating Sub-menu Features

The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc

content. By default, the rating system is unlocked. Once setup, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup.

Setting	Options		Function
Password	_ _ _ _		Enter a 4-digit password to
			activate the “Rating” feature.
Parental	1. Kid Safe		Select the appropriate rating
Ctrl			level for the intended audience.
	2.	G
			You may override higher rat-
	3.	PG
			ings by using your password.
	4.	PG-13
	5.	PG-R
	6.	R
	7.	NC-17
	8.	Adult
Load Fac-	Reset		Select “Reset” to restore the
tory			factory default settings for the
			Rating system only.

To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one.

NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc and the appropriate content will play. For details, please refer to the disc description.

Hardware Sub-menu Features

If the rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera mode is selected upon shifting into REVERSE gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside unit.

Setting	Options	Function
Camera In	Normal
	Mirror	Reverse the camera image as
		if looking through a rear-view
		mirror.

9

Setting	Options	Function
TFT Auto	On	The TFT panel automatically
Open		opens when the unit is turned
		on.
	Off	You must press the OPEN but-
		ton (1) to open the TFT panel.
	Manual	When the ignition is turned
		OFF, the TFT panel DOES
		NOT retract if it was previously
		out
Video Input	NTSC	The color signals are output in
(Input cir-		the standard NTSC format.
cuitry auto-
	PAL	The color signals are output in
detects the
		the standard PAL format.
video sig-
nal from the	Auto	The color signal output is
Aux In		switched automatically based
source).		on the current video input sig-
		nal - NTSC or PAL.

If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor return to its original input mode.

P.VOL Sub-menu Features

Setting	Options	Function
Source	Radio	Choose a source for which you
		would like to increase the rela-
	Disc
		tive volume (LEVEL).
	USB1
	USB2
	AUX IN
	NAV
	BT
Level	0-6	Increase relative volume for
		specified source up to 6 deci-
		bels.

TS Cal (Screen Calibration)

To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option.

After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed.