Tuner Operation

UV10

Tuner TFT Display

FM-1		P1 87.5 MHz
RADIO ST	LOC	PTY	RDS	01:02 PM

17.	: Touch to view the SOURCE MENU and select a new
	playback source
18.	MEM: View screen used to enter current channel into
	preset memory
19.	: Touch to view the SETUP menu
20.	PS (Preview Scan): Touch to scan all stations available,
	stopping for 5 seconds at each and continuing until a

Direct Tuning

To enter a radio station directly, touch the button or press the GOTO button (21) on the remote control to display the direct entry menu.

FM: _ _ _ . _ MHz

E Q

P1 87.5 MHz

P2 90.1 MHz

P3 98.1 MHz

P4 106.1MHz

P5 107.9MHz

P6 102.9MHz

PS:

BAND

1/2 MEM

	station is selected
21.	PTY Indicator
22.	RDS Indicator
23.	AS: Touch to automatically store stations
24.	PTY: Touch to activate the PTY function
25.	LOC: Press to activate/deactivate the Local function

Switching to Radio Tuner Source

• Touch the top left corner of the screen (the RADIO

circle) to view the SOURCE MENU. Touch “Radio”.

1	2	3
		Exit
4	5	6
7	8	9
0		Enter
0	Clear

PTY

2/2 LOC

23 16 25

1.Current radio band indicator

2.Radio frequency indicator

3.Clock

4.Stereo broadcasting indicator

5.Strong Local signal broadcasting indicator

6.Preset radio stations: Touch to recall preset stations

7.Information about the current function

8.EQ: Touch for quick access to Equalizer level settings

9.: Touch to access the direct entry screen

10.Current preset station indicator

11.<<: Touch to seek backward

12.>>: Touch to seek forward

13.<<: Touch to tune backward one step

14.>>: Touch to tune forward one step

15.BAND: Touch to change between AM/FM bands

16.1/2: Touch to view a second screen of menu choices

•	Press the SRC button (10) on the front panel or remote
	control (8) to switch to the AM/FM or RADIO source.

Selecting FM/AM Band

Touch the BAND button (15) on the screen, or press the >/ BAND button on the remote control (30) to change between the following bands: FM1, FM2, FM3, AM1, and AM2.

NOTE: The BAND button on the unit only works when the TFT is closed.

Seek Tuning

To seek the next higher station:

•Touch the >> button on screen.

•Press the >> button (19) on the remote control.

To seek the next lower station:

•Touch the << button on screen.

•Press the << button (17) on the remote control.

Manual Tuning

To increase or decrease the tuning frequency one step:

•Touch the >> or << buttons on screen.

•Press the >> or << buttons (14, 22) on the remote control.

Enter the desired radio station using the on-screen number pad. Press the Enter button to tune to the selected station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear.

Using Preset Stations

Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen.

Storing a Station

1.Select a band (if needed), then select a station.

2.Touch the on-screen MEM button (18) to open the preset screen.

Preset: _

P1 P2 P3

P4 P5 P6

E x i t

3.Touch the preset number in which you would like to store the current station (or touch Exit to cancel and close the menu). The preset number and station appears highlighted.

Recalling a Station

1.Select a band (if needed).