Jensen VM9223 operation manual Exiting the System Setup Menu

VM9223

Setting	Options	Function
Sub Filter	80Hz	Selecting a crossover frequency
		sets a cut-off frequency of the sub-
	120Hz
		woofer's LPF (low-pass filter). The
	160Hz	Crossover frequency setting has no
		effect if the subwoofer is set to
		“OFF”.
Bluetooth Sub-menu Features
Setting	Options	Function
Bluetooth	On	Enable Bluetooth function.
	Off	Disable Bluetooth function.
Auto Answer	On	The unit automatically answers all
		incoming calls.
	Off	Manually answer calls by touching
		the “call” button.
Connect	Manual	Connect the last active mobile
		phone by touching the CONNECT
		icon when disconnected.
	Auto	Automatically connect when your
		paired phone is in range.
Pairing Code		The default code is “1234”. Touch
		the keypad icon to open the keypad
		and enter the pairing code or pass
		key required for Bluetooth connec-
		tion to your mobile phone. Not all
		phones/devices require a pairing
		code. The default code is “0000” for
		many models.

Rating Sub-menu Features

The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once setup, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup.

Setting	Options	Function
Password	_ _ _ _	Enter a 4-digit password to activate
		the “Rating” feature.

Setting	Options		Function
Rating	1. Kid Safe		Select the appropriate rating level
			for the intended audience.
	2.	G
			You may override higher ratings by
	3. PG
			using your password.
	4.	PG-13
	5.	PG-R
	6.	R
	7.	NC-17
	8.	Adult
Load Factory	Reset		Select “Reset” to restore the factory
			default settings for all functions
			except the Rating system.

To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one.

NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc and the appropriate content will play. For details, please refer to the disc description.

Hardware Sub-menu Features

Setting	Options	Function
Camera In	Normal
	Mirror	Reverse the camera image as if
		looking through a rear-view mirror.
TFT Auto	On	The TFT panel automatically opens
Open		when the unit is turned on.
	Off	You must press the OPEN button
		(1) to open the TFT panel.
	Manual	When the ignition is turned OFF, the
		TFT panel DOES NOT retract if it
		was previously out
Video Input	NTSC	The color signals are output in the
(Input cir-		standard NTSC format.
cuitry autode-
	PAL	The color signals are output in the
tects the
video signal		standard PAL format.
from the Aux	Auto	The color signal output is switched
In source).
		automatically based on the current
		video input signal - NTSC or PAL.

If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the

reverse driving stops, the monitor return to its original input mode.

P.VOL Sub-menu Features

Setting	Options	Function
Source	Radio	Choose a source for which you
		would like to increase the relative
	Disc
		volume (LEVEL).
	USB
	AUX IN1
	AUX IN2
	NAVI
	BT
Level	0-6	Increase relative volume for speci-
		fied source up to 6 decibbels.

TS Cal (Screen Calibration)

To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option.

After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed.

DEMO Sub-Menu Features

You can stop/run demonstration mode or turn Demo Auto Run on/off by choosing the “Demo” option from the SETUP MENU.

When "Demo Auto Run" is Off, you can select "Demo Mode > Run" to start Demo Mode. Demo Mode scrolls through the various source screens, simulating activity on the display.

“Demo Mode” is discreetly displayed in yellow text (below the clock), to indicate the unit is in Demo Mode. To stop Demo Mode, press the upper-left quadrant of the TFT (Source select).

When “Demo Auto Run” is On, the unit will automatically display Demo Mode when powered on.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the SETUP button (31) on the remote control or touch the BACK button on the screen.

8