UV9
Audio
Setting | Options | Function |
|
|
|
|
|
|
DRC | Off | Employ the Dynamic Range |
|
| Control for better playback for |
| On | |
| low volumes. | |
|
| |
|
|
|
Loudness | Off | Turn bass boost on/off |
|
|
|
| On |
|
|
|
|
Subwoofer | Off | Turn the subwoofer on/off. |
|
|
|
| On |
|
|
|
|
Sub Filter | 80Hz | Selecting a crossover fre- |
|
| quency sets a |
| 100Hz | |
| of the subwoofer's LPF (low- | |
| 120Hz | pass filter). |
|
|
|
Demo Sub-Menu Features
You can stop/run demonstration mode or turn Demo Auto Run on/off by chooing the “Demo” option from the SETUP MENU.
When "Demo Auto Run" is Off, you can select "Demo Mode > Run" to start Demo Mode. Demo Mode scrolls through the various source screens, simulating activity on the display. “Demo Mode” is discreetly displayed in yellow text (below the clock), to indicate the unit is in Demo Mode. To stop Demo Mode, press the
When “Demo Auto Run” is On, the unit will automatically display Demo Mode when powered on.
Rating Sub-menu Features
The DVD system has a
Setting | Options | Function |
|
|
|
|
|
|
Password | _ _ _ _ | Enter a |
|
| activate the “Rating” feature. |
Setting | Options | Function | |
|
|
| |
|
|
| |
Rating | 1. Kid Safe | Select the appropriate rating | |
|
|
| level for the intended audience. |
| 2. | G | |
|
| ||
|
|
| You may override higher rat- |
| 3. | PG | |
|
|
| ings by using your password. |
| 4. | ||
|
| ||
|
|
|
|
| 5. |
| |
|
|
|
|
| 6. | R |
|
|
|
|
|
| 7. |
| |
|
|
|
|
| 8. | Adult |
|
|
|
| |
Load Fac- | Reset | Select “Reset” to restore the | |
tory |
|
| factory default settings for the |
|
|
| Rating system only. |
To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one.
NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc and the appropriate content will play. For details, please refer to the disc description.
Hardware Sub-menu Features
If the
Setting | Options | Function |
|
|
|
|
|
|
Camera In | Normal |
|
| Mirror | Reverse the camera image as |
|
| if looking through a |
|
| mirror. |
TFT Auto | On | The TFT panel automatically |
Open |
| opens when the unit is turned |
|
| on. |
| Off | You must press the OPEN but- |
|
| ton (1) to open the TFT panel. |
| Manual | When the ignition is turned |
|
| OFF, the TFT panel DOES |
|
| NOT retract if it was previously |
|
| out |
|
| 12 |
Setting | Options | Function | |
|
|
| |
|
|
| |
Video Input | NTSC | The color signals are output in | |
(Input cir- |
| the standard NTSC format. | |
cuitry auto- |
|
| |
PAL | The color signals are output in | ||
detects the | |||
| the standard PAL format. | ||
video sig- |
| ||
nal from the | Auto | The color signal output is | |
Aux In |
| switched automatically based | |
source). |
| on the current video input sig- | |
|
| nal - NTSC or PAL. |
If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor return to its original input mode.
P.VOL
Setting | Options | Function |
|
|
|
|
|
|
Source | Radio | Choose a source for which you |
|
| would like to increase the rela- |
| Disc | |
| tive volume (LEVEL). | |
|
| |
| USB |
|
|
|
|
| Aux In |
|
|
|
|
| Navi |
|
|
|
|
Level | Increase relative volume for | |
|
| specified source up to 6 deci- |
|
| bels. |
TS Cal (Screen Calibration)
To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option.
After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed.
Exiting the System Setup Menu
To exit setup mode and resume normal playback, press the SETUP button (29) on the remote control or touch the BACK button on the screen.