UV9 Tuner Operation | Jensen specification

UV9

TUNER OPERATION

Tuner TFT Display

8 17 1 4 5 10 29 19 3

	FM-1		P1 87.5 MHz
RADIO	ST	LOC				01:02 PM
P1		87.5	MHz
E
Q						14
P2		90.1	MHz			14
P3		98.1	MHz			20
P4		106.1	MHz		PS	12
P5		107.9	MHz
						13
P6		102.9	MHz
PS:				BAND	AS	MEM
PS:
6	7		11	15	16	18

1.Current radio band indicator

2.Radio frequency indicator

3.Clock

4.Stereo broadcasting indicator

5.Strong Local signal broadcasting indicator

6.Preset radio stations: Touch to recall preset stations

7.Information about the current function

8.Touch for quick access to Equalizer level settings

9.Touch to access the direct entry screen

10.Current preset station indicator

11.<<: Touch to seek backward

12.>>: Touch to seek forward

13.<<: Touch to tune backward one step

14.>>: Touch to tune forward one step

15.BAND: Touch to change between AM/FM bands

16.AS: Touch to automatically store stations

17.Touch to view the SOURCE MENU and select a new playback source

18.MEM: View screen used to enter current channel into preset memory

19.: Touch to view the SETUP menu

20.PS (Preview Scan): Touch to scan all stations available, stopping for 5 seconds at each and continuing until a station is selected

Switching to Radio Tuner Source

•Touch the top left corner of the screen (the RADIO circle) to view the SOURCE MENU. Touch “Radio”.

•Press the SRC button (10) on the front panel or remote control (8) to switch to the AM/FM or RADIO source.

Selecting FM/AM Band

Touch the BAND button (15) on the screen, or press the BAND button on the remote control (18) to change between the following bands: FM1, FM2, FM3, AM1, and AM2.

NOTE: The BAND button on the unit only works when the TFT is closed.

Seek Tuning

To seek the next higher station:

•Touch the >> button on screen.

•Press the >> button (17) on remote control.

To seek the next lower station:

•Touch the << button on screen.

•Press the << button (15) on the remote control.

Manual Tuning

To increase or decrease the tuning frequency one step:

•Touch the >> or << buttons on screen.

•Press the >> or << buttons (12, 20) on the remote control.

Direct Tuning

To enter a radio station directly, touch the button or press the GOTO button (19) on the remote control to display the direct entry menu.

FM: _ _ _ . _ MHz

1	2	3
		Exit
4	5	6
7	8	9
		Enter
0	Clear

Enter the desired radio station using the on-screen number pad. Press the Enter button to tune to the selected station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear.

Using Preset Stations

Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen.

Storing a Station

1.Select a band (if needed), then select a station.

2.Touch the on-screen MEM button (18) to open the preset screen.

Preset: _

P1 P2 P3

P4 P5 P6

E x i t

3.Touch the preset number in which you would like to store the current station (or touch Exit to cancel and close the menu). The preset number and station appears highlighted.

Recalling a Station

1.Select a band (if needed).

2.Touch an on-screen preset button (6) to select the corresponding stored station.


P1	87.5	MHz

P2	90.1	MHz
P3	98.1	MHz
P4	106.1	MHz
P5	107.9	MHz
P6	102.9	MHz