Other Useful Features
9 8 |
|
|
| / - | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SET UP | AUX |
Adjusting Brightness of Picture
NOTE
After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and select BRIGHT.
3 Press the 4 or 3 button within 10 seconds to adjust the brightness.
SET UP
AUX1
|
|
|
| 1 3 |
| BRIGHT | 0 |
| |
| COLOR | 0 |
| |
| TINT | 0 |
|
|
| AUX OUT | LINK |
| |
MIN | MAX |
4 Press the SET UP button to finish adjustments.
NOTE
If the AUX button is pressed and held for 2 seconds or more while in the adjustment screen, the setting of the brightness, color density, and tint is reset back to its center value.
Adjusting Color Density of Picture
NOTE
After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and select COLOR.
3 Press the 4 or 3 button within 10 seconds to adjust the color density.
SET UP
AUX1
| BRIGHT | 0 |
| 1 3 |
| COLOR | 0 |
|
|
|
|
| ||
| TINT | 0 |
|
|
| AUX OUT | LINK |
| |
– | + |
4 Press the SET UP button to finish adjustments.
NOTES
•If the AUX button is pressed and held for 2 seconds or more while in the adjustment screen, the setting of the brightness, color density, and tint is reset back to its center value.
•The color density cannot be adjusted in the NAVIGATION (RGB connection) mode.
Adjusting Tint of Picture
NOTE
After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and select TINT.
3 Press the 4 or 3 button within 10 seconds to adjust the tint.
SET UP
AUX1
| BRIGHT | 0 |
| 1 3 |
| COLOR | 0 |
|
|
|
|
| ||
| TINT | 0 |
|
|
| AUX OUT | LINK |
|
|
R | G |
4 Press the SET UP button to finish adjustments.
NOTES
•If the AUX button is pressed and held for 2 seconds or more while in the adjustment screen, the setting of the brightness, color density, and tint is reset back to its center value.
•The tint cannot be adjusted in the NAVIGATION (RGB connection) mode.