Other Useful Features
9 8 |
|
|
| / - | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PWR SET UP V. SEL
Selecting Rear Monitor
This unit has controls to switch the video and audio to a rear monitor if another (rear) monitor is connected.
NOTE
After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and select AUX OUT.
3 Press the 4 or 3 button within 10 seconds to carry out selection.
LINK:
Output the video/audio portion shown on the main monitor, to the rear monitor.
NAV.:
Output the navigation video/audio to the rear monitor. (Only when navigation unit is connected). AUX 1:
Output the AUX 1 video/audio to the rear monitor. AUX 2:
Output the AUX 2 video/audio to the rear monitor.
SET UP
AUX1
| BRIGHT | 0 |
| 1 |
| COLOR | 0 |
| 3 |
|
|
| ||
| TINT | 0 |
|
|
| AUX OUT | LINK |
|
|
|
|
|
|
|
L I N K N A V . A U X 1 A U X 2
4 Press the SET UP button to finish adjustments.
Setting the External Device Interrupt Mode
When used in conjunction with an Ai interception box
NOTE
After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and select OUT INT.
3 Press the 4 or 3 button within 10 seconds to turn ON.
SET UP
AUX1
| DIMMER | AUTO | 2 | |
| DIMMER Lv. - | 3 | ||
|
| |||
| OPEN/CLOSE | OFF |
| |
| OUT INT. | ON |
| |
|
|
|
|
|
| OFF ON |
|
|
|
|
|
|
|
|