Switching the Opening Screen
You can change the opening screen to your liking.
NOTE
After carrying out the steps 1 to 3 of "Viewing the switching display modes" described on page 6, perform the operation shown below.
1 Press the SET UP button.
2 Press the 9 or 8 button within 10 seconds and select H.U. IND.
3 Press the 9or | button within 10 seconds to |
set the selection. |
|
ON:
Special opening screen.
This setting is used when combining with the Flagship System model.
OFF:
Normal opening screen.
SET UP
AUX1
| H.U. IND. | ON |
| 3 |
|
|
|
| 3 |
|
|
| ||
|
|
|
|
|
OFF ON
4 Press the SET UP button to finish adjustments.
Turning Sound Guide Function On or Off
This function will give audible feedback with varying tones depending upon the button pressed.
1 Press and hold the PWR button for 2 seconds with the power OFF and turn the Sound Guide ON or OFF.
Switching the Video Screen
It is possible to change the video source for display while retaining the present audio portion.
1 Press the V.SEL button.
NAVIGATION
AUX1
AUX2
2 To release press and hold the V.SEL button for 2 seconds.
Using the External Input Terminal
It is possible to enjoy video and sound from a | FR |
video camera, etc. by simply connecting it with | |
an optional adapter cable. |
|
Main unit |
|
Video camera, etc. |
|
VIDEO OUT L AUDIO OUT R | ES |
| |
Optional adapter cable |
|
(RCA pin plugs |
|
[yellow, red, white] |
|
3.5ø miniplugs). |
|
NOTE
With the above connections, video source switching and settings and adjustments at adjustment screens are not DE possible.
IT
SE