1.3 Headset volume
Go to the "SETTINGS" menu, then to the "Handset sounds"
Select the desired volume level from the three options available.
1.4 Ringer type
Go to the "SETTINGS" menu, then to the "Handset sounds"
Select the desired melody from the six options available.
1.5 Ringer volume
Go to the "SETTINGS" menu, then to the "Handset sounds"
Select the desired volume level from the six options available, with the vibration call alert.
1.6 Switching key tones on/off
Go to the "SETTINGS" menu, then to the "Handset sounds"
: When this function is deactivated beeps indicating errors, validation, battery charging, and replacing of the handset on the charger are also deactivated.
1.7 Earpiece tone
Go to the "SETTINGS" menu, then to the "Handset sounds"
Select the desired tone setting from the three options available.
1.8 Loudspeaker tone
Go to the "SETTINGS" menu, then to the "Handset sounds"
Select the desired tone setting from the three options available.
1.9 Headset tone
Go to the "SETTINGS" menu, then to the "Handset sounds"
Select the desired tone setting from the three options available.
1.0 CLI ringer (with caller identification)
When a call is received, you will hear the selected melody on your handset if the number supplied by the network corresponds to a telephone number stored in the private phonebook.
Go to the "SETTINGS" menu, then to the "Handset sounds"
Select the desired melody from the six options available.
38 | System configuration |