Security

Your telephone features the most advanced technology for even greater ease and comfort of use.

Security information

For all countries, using this product is subject to approval by the authorities concerned. The wording of this approval appears on the label affixed to the back of the base station.

The marking certifies compliance with technical regulations in accordance with the directive 1999/5/EC for the safety of the user, electromagnetic perturbations and for radio spectrum.

Avoid all contact with liquids.

In order to avoid all risk of electric shock, never try to open the handset or the base station. Leave repairs to our after-sales service.

Avoid all contact between the battery load contacts and conductor items (keys, metal clips, jewelry, etc.).

Power connection

This product is designed for 230 V single-phase alternating current and is not suitable for IT facilities as defined in the EN 60-950 standard.

Mains supply is classified at dangerous voltage security level, as defined in the EN 60-950 standard.

This device can only be shut off completely by unplugging the power cable from the wall socket. The socket must be located near the device and easy to reach.

This device is not meant to operate in case of power failure. In order to call emergency services, please make sure that you always have access to a telephone not requiring power supply. If a power cut occurs while in a call, the telephone hangs up automatically and date and time may need resetting.

Telephone connection

Electric voltage of the telephone network corresponds to TNV-3 classification (Telecommunication Network Voltage), as defined in the EN 60-950 standard.

Environmental protection

Your telephone handset also benefits from the Philips EcoDesign program, which takes into account the relation between product and environment during its entire service life.

Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and where possible promote their recycling.

European agreement

"The equipment has been approved pursuant to Commission Decision 99/303/ EC for pan-European single terminal connection to the public switched telephone network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first instance."

: Product for use only in UK.

8Security

Page 11
Image 11
Philips TD6626/BE manual Security information, Power connection, Telephone connection, Environmental protection