Making a call from the Zenia 200 Voice base station
Press the 
key.
The green light starts flashing and you hear the dial tone.
Dial the number using keys 
to 
on the keypad.
The number is dialled automatically.
The loudspeaker and the microphone of the base station are switched on automatically. Speak in the direction of the microphone.
You can adjust the loudspeaker volume using the 
(increase) or (decrease) keys.
To hang up, press the 
key again.
The green light stops flashing.
Answering a call from the handset
When an incoming call is received, the handset rings. The green light and the t symbol flash.
RINGING
SILENCE
RINGING 01712345678
SILENCE
RINGING SMITH 01712345678
SILENCE
: You can stop the handset from ringing without answering the call by pressing
the 
key. Your base station will continue ringing and the appears.
symbol
: If the network supplies the caller's number, it appears on the screen. Also, the name is shown if it is stored in one of the phonebooks1.
To answer the call, press the 
key. The t symbol stops flashing.
: You can also press the 
key to answer the call and switch on the handset loudspeaker simultaneously.
To hang up, press the 
key again.
1 Caller identification is subject to network selection.
Using the telephone | 13 |
