Using the answer phone
You can access the answer phone (listening to messages, call screening, message recording, configuration) either from a handset registered to the base station (see “Answer phone settings”, page 42) or via the base station.
Your answer phone can operate in the following two answering modes:
•Answer only:
Your personal outgoing message will be played, but your callers cannot leave a message.
•Answer and record:
When the personal outgoing message is over, your callers can leave a message the recording capacity of which is a maximum of 30 minutes (including voice announcements and voice messages).
If during your absence callers have left new messages:
•the red light on the base station flashes.
•the display shows the number of new messages received.
: When the recording memory is full, the red light on the base station flashes rapidly and an error beep is heard.
The red light stops flashing when at least one message has been deleted.
Using the answer phone from the handset
From the handset, you can:
•switch the answer phone on or off,
•screen and intercept calls,
•listen to messages (including memos),
•delete a message received.
Switching the answer phone on or off
SETTINGS Answer phone
SELECT
ANSWER
Answer mode
SELECT
From "standby mode" press the scroll keys 
or 
as many times as required to go to the "SETTINGS" menu.
Confirm by pressing the 
key.
Press the scroll keys 
and 
as many times as required in order to select "Answer phone".
Confirm by pressing the 
key.
Confirm "Answer mode" by pressing the 
key and select the desired option:
•Answer only, only the personal outgoing message is played.
•Answer and record, the personal outgoing message is played and then messages are recorded.
•Off, the answer phone is switched off.
30 | Using the answer phone |
