
5.4 Selecting flash time
You may need to change this when connected to a PABX.
Go to the "SETTINGS" menu, then to the "Line settings"
Select one of the two options "Short flash" or "Long flash".
5.6 Displaying/deleting total time for your calls
Go to the "SETTINGS" menu, then to the "Line settings"
You can reset the total time of your calls by pressing the key.
The window that is displayed indicates the total time of the calls you have made since this function was last reset.
: When a call is over, before the handset reverts to "standby mode", you can also access this function by pressing the
key.
5.7 Switching music on hold on/off
Go to the "SETTINGS" menu, then to the "Line settings"
5.8 Inserting a pause between digits
If this function is on, a pause can be integrated automatically after the first digit of the number.
Go to the "SETTINGS" menu, then to the "Line settings"
5.9 Automatically inserting a prefix
When this function is on, a prefix can be inserted automatically.
Go to the "SETTINGS" menu, then to the "Line settings"
5.0 Setting up prefix
Go to the "SETTINGS" menu, then to the "Line settings"
Enter the prefix, then validate by pressing the key.
: The prefix will be transmitted each time the number is dialled; therefore, you must be sure that it is in line with your needs.
46 | System configuration |