AMX MVP-5200i manual Confirm and Upgrade the firmware via the USB port

Page 103

Upgrading Firmware

2.Click the Communications Settings button to open the Communications Settings dialog (FIG. 82).

FIG. 82 Communications Settings dialog box

3.Click on the NetLinx Master radio button from the Platform Selection section.

4.Click on the Virtual Master radio box from the Transport Connection Option section to configure the PC to communicate directly with a panel. Everything else, such as the Authentication, is greyed- out because this connection is not going through the Master’s UI.

5.Click the Edit Settings button on the Communications Settings dialog to open the Virtual NetLinx Master Settings dialog.

6.From within this dialog, enter the System number. The default is 1.

7.Click OK three times to close the open dialogs, save your settings, and return to the main NetLinx Studio application.

8.Click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System. The default System value is one.

9.Right-click on the Empty Device Tree/System entry and select Refresh System to re-populate the list.

The panel will not appear as a device below the virtual system number (in the Online Tree tab) until both the system number used in step 7 for the VNM is entered into the Master Connection section of the System Settings page and the panel is restarted.

Step 3: Confirm and Upgrade the firmware via the USB port

Use the CC-USB Type-A to Mini-B 5-wire programming cable to provide communication between the mini-USB Program port on the touch panel and the PC. This method of communication is used to transfer firmware Kit files and TPD4 touch panel files.

A mini-USB connection is only detected after it is installed onto an active panel. Connection to a previously powered panel causes the panel to reboot, allows the PC to detect the panel, and assigns an appropriate USB driver.

1.Verify that the direct USB connection (Type-A on the panel to mini-USB on the panel) is configured properly, using the steps outlined in the previous two sections.

2.With the panel already configured for USB communication and the Virtual Master setup within NetLinx Studio, verify that the panel is ready to receive files.

MVP-5200i Modero Viewpoint Widescreen Touch Panel	95

Image 103

Contents MVP-5200i AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Configuring Communication Programming Appendix a Text Formatting 155 Introduction MVP-5200i Specifications FG5966-01, FG5966-02 External Components Included AccessoriesMemory Panel LCD ParametersMemory Table Charging Station Connector LocationsOther AMX Equipment Navigation Wheel Basic OperationIntercom Microphone Audio/Video Capabilities Power ManagementCleaning the Touch Overlay, Case, and Navigation Wheel Stylus Kick StandMVP-TCS-52 Specifications Powering the MVP-TCS-52Table Charging Station Cleaning the MVP-TCS-52 Connections and WiringRecharging Wall Charging Station MVP-WCS-52 SpecificationsComponents Front PanelRecharging Unlocking the touch panelInstalling the Plastic Conduit Box Installing the MVP-WCS-52All lockdown wings folded flat during installation Tie-Wrap Anchors Mini-Captive Wire Connector Plug female MVP-WCS-52 Typical Metal Conduit Box Installation Installing the Optional Metal Conduit BoxConfiguring Communication IR transmitter window on the MVP-5200i-GW IR CommunicationAccessing the Setup and Protected Setup Pages Modero Setup and System SettingsSetting the Panel’s Device Number Wireless Settings Wireless Access OverviewConfigure the Device’s Wireless IP Settings Configuring Wireless Network AccessWireless communication using a Dhcp Address Wireless communication using a Static IP Address Site Survey Using the Site Survey toolConfiguring Communication Site Survey of available Waps Unsecured WAP shown selected Configure the Card’s Wireless Security SettingsSame as Abc Manually setting Ssid Automatically setting SsidRequired Information WEP Passphrase Keyboard Configuring Communication Ethernet over USB Choose a Master Connection ModeFound New Hardware Wizard dialogue box Touch panel setupNext box , make sure to Completing the Found New Hardware Wizard Select Use the following IP Address Configure a Virtual NetLinx Master using NetLinx StudioCommunications Settings dialog box Ethernet Mode Description ProceduresConnection Modes Master Connection to a Virtual Master via Ethernet Start Run cmd command Ethernet G4 Web Control Using G4 Web Control to Interact with a G4 PanelConfiguring Communication Using the NetLinx Master to control the G4 panel Web Control VNC installation and Password entry screens Configuring Communication Page Setup Setup PagesNavigation Buttons Inactivity Page Flip Display TimeoutTimeout Connection StatusNavigation Buttons Protected Setup PagesProject Information Information ButtonProject Information Port Sales OrderPurchase Order AMX IR 38K AssignedPanel Information Panel InformationTime & Date Setup Time & Date SettingsDefault Panel Sounds Audio SettingsAudio Settings Master VolumeSupported WAV Sample Rates WAV files Supported sample ratesAnalog Battery Battery SettingsBattery Power Brightness Limit Page Device Number Protected SetupOptions Reboot/Shutdown Panel System RecoveryDocking Station Protected Setup Navigation Buttons Protected Setup Navigation ButtonsMaster Connection System SettingsSystem Settings Page Elements IP SettingsEthernet Only disabled when USB is selected System Setting Page ElementsWireless Settings Wireless SettingsNetwork Name Ssid WAP names Access Point MACWireless Security AddressRF Link Info EAP-TLSWireless Security Support Wireless Security802.11g Wi-Fi CF card Open Clear Text Settings Open Clear Text SettingsSave/Cancel Static WEP Settings Static WEP SettingsWEP 64 / WEP WEP Keys Default KeyAuthentication Generate PassphraseWPA-PSK Settings WPA-PSK SettingsPassword/Pass Phrase EAP-PEAP EAP-TTLS EAP-TLS EAP Security & Server Certificates OverviewWireless Settings page EAP-LEAP Settings EAP-LEAP SettingsPassword EAP-LEAP SettingsIdentity EAP-FAST Settings EAP-FAST SettingsProvisioning Been DisabledAnonymous Identity Automatic PACWireless Settings page EAP-PEAP Settings EAP-PEAP SettingsPeap Version EAP-PEAP SettingsInner Authentication Type Certificate AuthorityEAP-TTLS Settings EAP-TTLS SettingsSsid Service Set Identifier Anonymous@amx.com EAP-TLS Settings EAP-TLS SettingsClient Certificate Private Key passwordPrivate Key Certificate Types Supported by the Modero Firmware Client certificate configurationClient Certificate Configuration Certificates and their ExtensionsCalibration CalibrationG4 Web Control G4 Web Control SettingsG4 Web Control Settings G4 Web Control TimeoutProtected Setup Pages Image Cache Settings Other SettingsCache Settings Cache SettingsPassword Setup Password SettingsProtected Setup Pages Panel Connection Logs ToolsPanel Connection Logs Panel Statistics Panel StatisticsConnection Utility Connection UtilityConfigure the panel for a USB Connection Type Scale Images For Setup PagesUpgrading the Modero Firmware via the USB port Prepare Studio for communication via the USB port Confirm and Upgrade the firmware via the USB port Upgrading Firmware Using USB for a Virtual Master transfer Network Connections window Special Note for Network Interface ConnectionsAdvanced Settings window 100 MVP-5200i Modero Viewpoint Widescreen Touch Panel Navigation Wheel Programming CommandsCommands Overview@PHP @DPG@PDR @PHECommands @PPX @PPM@PPN @PPT@PSP @PSE@PST Ppog PpofPpon Index No Name Red Green Blue Programming NumbersRGB triplets and names for basic 88 colors RGB Values for all 88 Basic Colors108 MVP-5200i Modero Viewpoint Widescreen Touch Panel Font styles and ID numbers Default Font Styles and ID NumbersFont ID Font type Size Border styles Border styles and Programming numbersBorder Styles and Programming Numbers TPD4 Border Styles by NameMVP-5200i Modero Viewpoint Widescreen Touch Panel 111 112 MVP-5200i Modero Viewpoint Widescreen Touch Panel APF Button CommandsButton Commands ANIBCB BAUBCF BDO BCTBFB Entry is required BIMBLN BMC Sendcommand Panel,BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CTBMF-vt addr range,button states range,data BMFCont BNC BMIBML BMPBNT BNNBOP BOS BORBPP BSO BRDBSF BSMBVT BVLBVN BVPENA CPFDLD DPFGDI FONGIV GRU GLHGLL GRDICO GSNIRM JSI JSBMDC JSTMBT Pass dataTXT TECTEF Effect namesMVP Strings to Master MVP Panel Lock Passcode commandsMVP Panel Lock Passcode Commands Miscellaneous MVP Strings back to the MasterLPS Text Effects NamesText Effects LPRDefineevent Button Query Commands?BCB Button Query CommandsSend Command Panel,?BCB-529,1 Custom Event Fields?BCT ?BCF?BOP ?BMP?BWW ?BRD?ICO ?FON?JSI ?JSB?TEC ?JST?TEF-vt addr range,button states range Send Command Panel,?TEF-529,1Send Command Panel,?TXT-529,1 ?TEFPanel Runtime Operations Panel Runtime Operation CommandsBrit @AKP@AKR Beep@PKP Setup@EKP PkeypTpageoff @SOU@TKP TpageonKPS Input CommandsInput Commands CALEmbedded Codes Embedded codesDecimal numbers Hexidecimal values Virtual keystroke Panel Setup Commands Panel Setup CommandsDynamic Image Commands Dynamic Image CommandsHost ’%Hhost’ File ’%Ffile’ Description RAF-resource name,dataPage Battery Life and Replacement Screw placement at the back of the MVP-5200i- GW Battery ReplacementMVP-5200i Modero Viewpoint Widescreen Touch Panel 155 Page Example Text Formatting Codes for Bargraphs/JoysticksBargraph Text Code Inputs Formatting Code OperationsCharacter Masking Rule Text Area Input MaskingInput mask character types Character TypesInput mask literals Input mask rangesInput mask next field characters Input mask operationsOutput Examples Input mask output examplesCommon Name Input Mask Sequence Panel Information URL ResourcesSpecial escape sequences Escape SequencesOverview of Wireless Technology Appendix B Wireless Technology802.1x TerminologyWEP WPA2 Method Credential Type Authentication Pros Cons EAP AuthenticationEAP characteristics EAP Method CharacteristicsLAN EAP communication overviewSetup the Panel and PC for USB Communication Configuring your MVP-5200i for USB CommunicationAMX Certificate Upload Utility Confirm the Installation of the USB Driver on the PC How to Upload a Certificate File Panel Doesn’t Respond To Touches Battery Will Not Hold Or Take a ChargeNetLinx Studio Only Detects One Of My Connected Masters MVP-5200i Isn’t Appearing In The Online Tree TabMVP Can’t Obtain a Dhcp Address My WEP Doesn’t Seem To Be WorkingOnly One Modero Panel In My System Shows Up Page Page It’s Your World Take Control

Related manuals

Manual 188 pages 10.9 Kb