AMX MVP-5200i manual EAP-TLS Settings

Page 89

Protected Setup Pages

EAP-TLS Settings

Press the EAP-TLSbutton to open the EAP-TLS Settings page (FIG. 72).

FIG. 72 Wireless Settings page - EAP-TLS Settings

TLS (Transport Layer Security) was the original standard wireless LAN EAP authentication protocol. TLS requires additional work during the deployment phase, but provides additional security since even a compromised password is not enough to break into an EAP-TLS protected wireless network environment.

EAP-TLS security is designed for wireless environments where it is necessary to securely transmit data over a wireless network by adding an additional level of security protocol via the use of a private key.

EAP-TLS Settings

SSID (Service Set Identifier):

Opens an on-screen keyboard for entering the SSID name used on the target

 

WAP. The SSID is a unique name used by the WAP, and is assigned to all

 

panels on that network. An SSID is required by the WAP before the panel is

 

permitted to join the network.

 

• The SSID is case sensitive and must not exceed 32 characters.

 

• Make sure this setting is the same for all points in the wireless network.

 

NXA-WAP200Gs use AMX as their default SSID.

 

• With EAP security, the SSID of the WAP must be entered. If it is left blank,

 

the panel will try to connect to the first access point detected that supports

 

EAP. However, a successful connection is not guaranteed because the

 

detected WAP may be connected to a RADIUS server, which may not

 

support this EAP type and/or have the proper user identities configured.

 

 

Identity:

Opens an on-screen keyboard for entering an EAP Identity string (used by

 

the panel to identify itself to an Authentication (RADIUS) Server).

 

Note: This information is similar to a username used to login to a secured

 

server or workstation. This works in tandem with the Password string, which

 

is similar to the password entered to gain access to a secured workstation.

 

Typically, this is in the form of a username such as: jdoe@amx.com.

 

 

MVP-5200i Modero Viewpoint Widescreen Touch Panel

81

 

 

Image 89
Contents MVP-5200i AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Configuring Communication Programming Appendix a Text Formatting 155 Introduction MVP-5200i Specifications FG5966-01, FG5966-02 Memory Included AccessoriesPanel LCD Parameters External ComponentsOther AMX Equipment Table Charging Station Connector LocationsMemory Intercom Microphone Basic OperationNavigation Wheel Cleaning the Touch Overlay, Case, and Navigation Wheel Power ManagementStylus Kick Stand Audio/Video CapabilitiesTable Charging Station Powering the MVP-TCS-52MVP-TCS-52 Specifications Recharging Connections and WiringCleaning the MVP-TCS-52 Wall Charging Station MVP-WCS-52 SpecificationsComponents Front PanelRecharging Unlocking the touch panelInstalling the Plastic Conduit Box Installing the MVP-WCS-52All lockdown wings folded flat during installation Tie-Wrap Anchors Mini-Captive Wire Connector Plug female MVP-WCS-52 Typical Metal Conduit Box Installation Installing the Optional Metal Conduit BoxConfiguring Communication IR transmitter window on the MVP-5200i-GW IR CommunicationAccessing the Setup and Protected Setup Pages Modero Setup and System SettingsSetting the Panel’s Device Number Wireless Settings Wireless Access OverviewWireless communication using a Dhcp Address Configuring Wireless Network AccessConfigure the Device’s Wireless IP Settings Wireless communication using a Static IP Address Site Survey Using the Site Survey toolConfiguring Communication Site Survey of available Waps Unsecured WAP shown selected Configure the Card’s Wireless Security SettingsSame as Abc Manually setting Ssid Automatically setting SsidRequired Information WEP Passphrase Keyboard Configuring Communication Ethernet over USB Choose a Master Connection ModeFound New Hardware Wizard dialogue box Touch panel setupNext box , make sure to Completing the Found New Hardware Wizard Select Use the following IP Address Configure a Virtual NetLinx Master using NetLinx StudioCommunications Settings dialog box Connection Modes Mode Description ProceduresEthernet Master Connection to a Virtual Master via Ethernet Start Run cmd command Ethernet G4 Web Control Using G4 Web Control to Interact with a G4 PanelConfiguring Communication Using the NetLinx Master to control the G4 panel Web Control VNC installation and Password entry screens Configuring Communication Page Navigation Buttons Setup PagesSetup Timeout Display TimeoutConnection Status Inactivity Page FlipNavigation Buttons Protected Setup PagesProject Information Information ButtonProject Information Purchase Order Sales OrderAMX IR 38K Assigned PortPanel Information Panel InformationTime & Date Setup Time & Date SettingsAudio Settings Audio SettingsMaster Volume Default Panel SoundsAnalog WAV files Supported sample ratesSupported WAV Sample Rates Battery Battery SettingsBattery Power Brightness Limit Page Options Protected SetupDevice Number Docking Station System RecoveryReboot/Shutdown Panel Protected Setup Navigation Buttons Protected Setup Navigation ButtonsSystem Settings Page Elements System SettingsIP Settings Master ConnectionEthernet Only disabled when USB is selected System Setting Page ElementsWireless Settings Wireless SettingsWireless Security Access Point MACAddress Network Name Ssid WAP namesRF Link Info EAP-TLS802.11g Wi-Fi CF card Wireless SecurityWireless Security Support Save/Cancel Open Clear Text SettingsOpen Clear Text Settings WEP 64 / WEP Static WEP SettingsStatic WEP Settings Authentication Default KeyGenerate Passphrase WEP KeysPassword/Pass Phrase WPA-PSK SettingsWPA-PSK Settings EAP-PEAP EAP-TTLS EAP-TLS EAP Security & Server Certificates OverviewWireless Settings page EAP-LEAP Settings EAP-LEAP SettingsIdentity EAP-LEAP SettingsPassword EAP-FAST Settings EAP-FAST SettingsAnonymous Identity Been DisabledAutomatic PAC ProvisioningWireless Settings page EAP-PEAP Settings EAP-PEAP SettingsInner Authentication Type EAP-PEAP SettingsCertificate Authority Peap VersionSsid Service Set Identifier EAP-TTLS SettingsEAP-TTLS Settings Anonymous@amx.com EAP-TLS Settings EAP-TLS SettingsPrivate Key Private Key passwordClient Certificate Client Certificate Configuration Client certificate configurationCertificates and their Extensions Certificate Types Supported by the Modero FirmwareCalibration CalibrationG4 Web Control Settings G4 Web Control SettingsG4 Web Control Timeout G4 Web ControlProtected Setup Pages Cache Settings Other SettingsCache Settings Image Cache SettingsPassword Setup Password SettingsProtected Setup Pages Panel Connection Logs ToolsPanel Connection Logs Panel Statistics Panel StatisticsConnection Utility Connection UtilityUpgrading the Modero Firmware via the USB port Scale Images For Setup PagesConfigure the panel for a USB Connection Type Prepare Studio for communication via the USB port Confirm and Upgrade the firmware via the USB port Upgrading Firmware Using USB for a Virtual Master transfer Network Connections window Special Note for Network Interface ConnectionsAdvanced Settings window 100 MVP-5200i Modero Viewpoint Widescreen Touch Panel Commands CommandsOverview Navigation Wheel Programming@PDR @DPG@PHE @PHPCommands @PPN @PPM@PPT @PPX@PST @PSE@PSP Ppon PpofPpog RGB triplets and names for basic 88 colors Programming NumbersRGB Values for all 88 Basic Colors Index No Name Red Green Blue108 MVP-5200i Modero Viewpoint Widescreen Touch Panel Font ID Font type Size Default Font Styles and ID NumbersFont styles and ID numbers Border Styles and Programming Numbers Border styles and Programming numbersTPD4 Border Styles by Name Border stylesMVP-5200i Modero Viewpoint Widescreen Touch Panel 111 112 MVP-5200i Modero Viewpoint Widescreen Touch Panel Button Commands Button CommandsANI APFBCF BAUBCB BFB BCTBDO BLN BIMEntry is required BMC Sendcommand Panel,BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CTBMF-vt addr range,button states range,data BMFCont BML BMIBMP BNCBOP BNNBNT BPP BORBOS BSF BRDBSM BSOBVN BVLBVP BVTDLD CPFDPF ENAGIV FONGDI GLL GLHGRD GRUIRM GSNICO JSI JSBMBT JSTPass data MDCTEF TECEffect names TXTMVP Panel Lock Passcode Commands MVP Panel Lock Passcode commandsMiscellaneous MVP Strings back to the Master MVP Strings to MasterText Effects Text Effects NamesLPR LPSDefineevent Button Query CommandsSend Command Panel,?BCB-529,1 Button Query CommandsCustom Event Fields ?BCB?BCT ?BCF?BOP ?BMP?BWW ?BRD?ICO ?FON?JSI ?JSB?TEC ?JSTSend Command Panel,?TXT-529,1 Send Command Panel,?TEF-529,1?TEF ?TEF-vt addr range,button states rangePanel Runtime Operations Panel Runtime Operation Commands@AKR @AKPBeep Brit@EKP SetupPkeyp @PKP@TKP @SOUTpageon TpageoffInput Commands Input CommandsCAL KPSDecimal numbers Hexidecimal values Virtual keystroke Embedded codesEmbedded Codes Panel Setup Commands Panel Setup CommandsDynamic Image Commands Dynamic Image CommandsHost ’%Hhost’ File ’%Ffile’ Description RAF-resource name,dataPage Battery Life and Replacement Screw placement at the back of the MVP-5200i- GW Battery ReplacementMVP-5200i Modero Viewpoint Widescreen Touch Panel 155 Page Bargraph Text Code Inputs Text Formatting Codes for Bargraphs/JoysticksFormatting Code Operations ExampleInput mask character types Text Area Input MaskingCharacter Types Character Masking RuleInput mask next field characters Input mask rangesInput mask operations Input mask literalsCommon Name Input Mask Input mask output examplesOutput Examples Special escape sequences URL ResourcesEscape Sequences Sequence Panel InformationOverview of Wireless Technology Appendix B Wireless Technology802.1x TerminologyWEP WPA2 EAP characteristics EAP AuthenticationEAP Method Characteristics Method Credential Type Authentication Pros ConsLAN EAP communication overviewAMX Certificate Upload Utility Configuring your MVP-5200i for USB CommunicationSetup the Panel and PC for USB Communication Confirm the Installation of the USB Driver on the PC How to Upload a Certificate File Panel Doesn’t Respond To Touches Battery Will Not Hold Or Take a ChargeMVP Can’t Obtain a Dhcp Address MVP-5200i Isn’t Appearing In The Online Tree TabMy WEP Doesn’t Seem To Be Working NetLinx Studio Only Detects One Of My Connected MastersOnly One Modero Panel In My System Shows Up Page Page It’s Your World Take Control
Related manuals
Manual 188 pages 10.9 Kb