AMX MVP-5200i manual Password Settings, Password Setup

Protected Setup Pages

Password Settings Page

The options on the Password Settings page (FIG. 76) allow assignment of passwords required for users to access the Protected Setup page, and to release the device from a MVP-WCS-52 Charging Station.

FIG. 76 Password Setup page

Features on this page include:

Password Setup Page

Back:	Saves all changes and returns to the previous page.
Connection Status icon:	The icon in the upper-right corner of each Protected Setup page provides a
	constant visual indication of current connection status.
	Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
	Master.
In Panel Password	Accesses the alphanumeric values associated to particular password sets.
Change:	• The PASSWORD 1, 2, 3, 4 and 5 (protected) buttons open a keyboard to
	enter alphanumeric values associated to the selected password group.
	Note: Clearing Password #5 removes the need to enter a password before
	accessing the Protected Setup page.
User Access:	Lists all previous password users, in the order in which they accessed the
	device.
Enable/Enabled:	When enabled, this button notes that all password entry attempts will be
	recorded.
Report:	When enabled, this button sends a report to the Master on any attempts or
	successes at entering a password.

To change a previously established password:

1.In the Password Settings page, press the button in the In Panel Password Change section for the particular password to be changed.

Password 5 is protected, and can only be changed by the Administrator.

2.In the Password keyboard, enter the new alphanumeric password.

3.Press Done when complete.

88 MVP-5200i Modero Viewpoint Widescreen Touch Panel