AMX MVP-5200i Memory, Panel LCD Parameters, External Components, Operating/Storage, Environment

Page 11

Introduction

MVP-5200i Specifications (FG5966-01, FG5966-02) (Cont.)

Memory:

• 128 MB Mobile DDRAM (upgrade not available)

 

• 256 MB NAND Flash (upgrade not available)

 

 

Panel LCD Parameters:

• Size: 5.2" (13.21 cm)

 

• Type: WVGA

 

• Aspect ratio: 16 x 9

 

• Brightness (luminance): 300 cd/m2

 

• Channel transparency: 8-bit Alpha blending

 

• Contrast ratio: 20:1

 

• Display colors: 262,144 colors (18-bit color depth)

 

• Dot/pixel pitch: 0.23 mm

 

• Panel type: TFT Color Active-Matrix

 

• Screen resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency

 

• Viewing angles:

 

Vertical: + 40° (up from center) and - 80° (down from center)

 

Horizontal: + 60° (left from center) and - 60° (right from center)

 

 

External Components

 

Connector:

DC power port: Stylus Slot: Microphone:

Speaker:

Audio Standards:

5-pin Mini-USB connector used for audio output to USB headphones, programming, firmware updates, and touch panel file transfer between the PC and the target panel.

Note: When connecting the panel to PC using a CC-USB (or compatible) cable, be sure to power the panel On before attempting to connect the USB cable from the PC to the mini-USB port on the panel.

2.5 mm port to power the panel away from a Charging Station.

Slot where the included stylus is stored, located on the right side of the device.

For use with the intercom feature.

Frequency: 20 to 160,000 Hz

S/N Ratio: More than 58 dB

4Ohm

2 Watts 300Hz cutoff frequency

G.711 sound standard

75dB SPL@1m

IR Emitters:

Transmit IR over 20 feet (6.10 m) from the panel.

 

• IR emitters on G4 panels share the device address number of the panel.

 

• Transmits AMX fixed frequencies at 38KHz and 455KHz and user

 

programmable frequencies from 20KHz to 1.5MHz

 

 

Operating/Storage

• Operating Temperature: 0° C (32° F) to 40° C (104° F)

Environment

• Operating Humidity: 20% - 85% RH

 

• Storage Temperature: -20° C (-4° F) to 60° C (140° F)

 

• Storage Humidity: 5% - 85% RH

 

 

Included Accessories:

MVP-5200i Installation Guide (93-5966-01)

 

• PS3.0 Power Supply (FG423-30)

 

MVP-STYLUS-52 (pre-installed onto the right side of the unit) (FG5966-

 

10xx)

 

 

MVP-5200i Modero Viewpoint Widescreen Touch Panel

3

 

 

Image 11
Contents MVP-5200i AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Configuring Communication Programming Appendix a Text Formatting 155 Introduction MVP-5200i Specifications FG5966-01, FG5966-02 External Components Included AccessoriesMemory Panel LCD ParametersOther AMX Equipment Table Charging Station Connector LocationsMemory Intercom Microphone Basic OperationNavigation Wheel Audio/Video Capabilities Power ManagementCleaning the Touch Overlay, Case, and Navigation Wheel Stylus Kick StandTable Charging Station Powering the MVP-TCS-52MVP-TCS-52 Specifications Recharging Connections and WiringCleaning the MVP-TCS-52 Wall Charging Station MVP-WCS-52 SpecificationsComponents Front PanelRecharging Unlocking the touch panelInstalling the Plastic Conduit Box Installing the MVP-WCS-52All lockdown wings folded flat during installation Tie-Wrap Anchors Mini-Captive Wire Connector Plug female MVP-WCS-52 Typical Metal Conduit Box Installation Installing the Optional Metal Conduit BoxConfiguring Communication IR transmitter window on the MVP-5200i-GW IR CommunicationAccessing the Setup and Protected Setup Pages Modero Setup and System SettingsSetting the Panel’s Device Number Wireless Settings Wireless Access OverviewWireless communication using a Dhcp Address Configuring Wireless Network AccessConfigure the Device’s Wireless IP Settings Wireless communication using a Static IP Address Site Survey Using the Site Survey toolConfiguring Communication Site Survey of available Waps Unsecured WAP shown selected Configure the Card’s Wireless Security SettingsSame as Abc Manually setting Ssid Automatically setting SsidRequired Information WEP Passphrase Keyboard Configuring Communication Ethernet over USB Choose a Master Connection ModeFound New Hardware Wizard dialogue box Touch panel setupNext box , make sure to Completing the Found New Hardware Wizard Select Use the following IP Address Configure a Virtual NetLinx Master using NetLinx StudioCommunications Settings dialog box Connection Modes Mode Description ProceduresEthernet Master Connection to a Virtual Master via Ethernet Start Run cmd command Ethernet G4 Web Control Using G4 Web Control to Interact with a G4 PanelConfiguring Communication Using the NetLinx Master to control the G4 panel Web Control VNC installation and Password entry screens Configuring Communication Page Navigation Buttons Setup PagesSetup Inactivity Page Flip Display TimeoutTimeout Connection StatusNavigation Buttons Protected Setup PagesProject Information Information ButtonProject Information Port Sales OrderPurchase Order AMX IR 38K AssignedPanel Information Panel InformationTime & Date Setup Time & Date SettingsDefault Panel Sounds Audio SettingsAudio Settings Master VolumeAnalog WAV files Supported sample ratesSupported WAV Sample Rates Battery Battery SettingsBattery Power Brightness Limit Page Options Protected SetupDevice Number Docking Station System RecoveryReboot/Shutdown Panel Protected Setup Navigation Buttons Protected Setup Navigation ButtonsMaster Connection System SettingsSystem Settings Page Elements IP SettingsEthernet Only disabled when USB is selected System Setting Page ElementsWireless Settings Wireless SettingsNetwork Name Ssid WAP names Access Point MACWireless Security AddressRF Link Info EAP-TLS802.11g Wi-Fi CF card Wireless SecurityWireless Security Support Save/Cancel Open Clear Text SettingsOpen Clear Text Settings WEP 64 / WEP Static WEP SettingsStatic WEP Settings WEP Keys Default KeyAuthentication Generate PassphrasePassword/Pass Phrase WPA-PSK SettingsWPA-PSK Settings EAP-PEAP EAP-TTLS EAP-TLS EAP Security & Server Certificates OverviewWireless Settings page EAP-LEAP Settings EAP-LEAP SettingsIdentity EAP-LEAP SettingsPassword EAP-FAST Settings EAP-FAST SettingsProvisioning Been DisabledAnonymous Identity Automatic PACWireless Settings page EAP-PEAP Settings EAP-PEAP SettingsPeap Version EAP-PEAP SettingsInner Authentication Type Certificate AuthoritySsid Service Set Identifier EAP-TTLS SettingsEAP-TTLS Settings Anonymous@amx.com EAP-TLS Settings EAP-TLS SettingsPrivate Key Private Key passwordClient Certificate Certificate Types Supported by the Modero Firmware Client certificate configurationClient Certificate Configuration Certificates and their ExtensionsCalibration CalibrationG4 Web Control G4 Web Control SettingsG4 Web Control Settings G4 Web Control TimeoutProtected Setup Pages Image Cache Settings Other SettingsCache Settings Cache SettingsPassword Setup Password SettingsProtected Setup Pages Panel Connection Logs ToolsPanel Connection Logs Panel Statistics Panel StatisticsConnection Utility Connection UtilityUpgrading the Modero Firmware via the USB port Scale Images For Setup PagesConfigure the panel for a USB Connection Type Prepare Studio for communication via the USB port Confirm and Upgrade the firmware via the USB port Upgrading Firmware Using USB for a Virtual Master transfer Network Connections window Special Note for Network Interface ConnectionsAdvanced Settings window 100 MVP-5200i Modero Viewpoint Widescreen Touch Panel Navigation Wheel Programming CommandsCommands Overview@PHP @DPG@PDR @PHECommands @PPX @PPM@PPN @PPT@PST @PSE@PSP Ppon PpofPpog Index No Name Red Green Blue Programming NumbersRGB triplets and names for basic 88 colors RGB Values for all 88 Basic Colors108 MVP-5200i Modero Viewpoint Widescreen Touch Panel Font ID Font type Size Default Font Styles and ID NumbersFont styles and ID numbers Border styles Border styles and Programming numbersBorder Styles and Programming Numbers TPD4 Border Styles by NameMVP-5200i Modero Viewpoint Widescreen Touch Panel 111 112 MVP-5200i Modero Viewpoint Widescreen Touch Panel APF Button CommandsButton Commands ANIBCF BAUBCB BFB BCTBDO BLN BIMEntry is required BMC Sendcommand Panel,BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CTBMF-vt addr range,button states range,data BMFCont BNC BMIBML BMPBOP BNNBNT BPP BORBOS BSO BRDBSF BSMBVT BVLBVN BVPENA CPFDLD DPFGIV FONGDI GRU GLHGLL GRDIRM GSNICO JSI JSBMDC JSTMBT Pass dataTXT TECTEF Effect namesMVP Strings to Master MVP Panel Lock Passcode commandsMVP Panel Lock Passcode Commands Miscellaneous MVP Strings back to the MasterLPS Text Effects NamesText Effects LPRDefineevent Button Query Commands?BCB Button Query CommandsSend Command Panel,?BCB-529,1 Custom Event Fields?BCT ?BCF?BOP ?BMP?BWW ?BRD?ICO ?FON?JSI ?JSB?TEC ?JST?TEF-vt addr range,button states range Send Command Panel,?TEF-529,1Send Command Panel,?TXT-529,1 ?TEFPanel Runtime Operations Panel Runtime Operation CommandsBrit @AKP@AKR Beep@PKP Setup@EKP PkeypTpageoff @SOU@TKP TpageonKPS Input CommandsInput Commands CALDecimal numbers Hexidecimal values Virtual keystroke Embedded codesEmbedded Codes Panel Setup Commands Panel Setup CommandsDynamic Image Commands Dynamic Image CommandsHost ’%Hhost’ File ’%Ffile’ Description RAF-resource name,dataPage Battery Life and Replacement Screw placement at the back of the MVP-5200i- GW Battery ReplacementMVP-5200i Modero Viewpoint Widescreen Touch Panel 155 Page Example Text Formatting Codes for Bargraphs/JoysticksBargraph Text Code Inputs Formatting Code OperationsCharacter Masking Rule Text Area Input MaskingInput mask character types Character TypesInput mask literals Input mask rangesInput mask next field characters Input mask operationsCommon Name Input Mask Input mask output examplesOutput Examples Sequence Panel Information URL ResourcesSpecial escape sequences Escape SequencesOverview of Wireless Technology Appendix B Wireless Technology802.1x TerminologyWEP WPA2 Method Credential Type Authentication Pros Cons EAP AuthenticationEAP characteristics EAP Method CharacteristicsLAN EAP communication overviewAMX Certificate Upload Utility Configuring your MVP-5200i for USB CommunicationSetup the Panel and PC for USB Communication Confirm the Installation of the USB Driver on the PC How to Upload a Certificate File Panel Doesn’t Respond To Touches Battery Will Not Hold Or Take a ChargeNetLinx Studio Only Detects One Of My Connected Masters MVP-5200i Isn’t Appearing In The Online Tree TabMVP Can’t Obtain a Dhcp Address My WEP Doesn’t Seem To Be WorkingOnly One Modero Panel In My System Shows Up Page Page It’s Your World Take Control
Related manuals
Manual 188 pages 10.9 Kb