AMX MVP-5200i manual Only One Modero Panel In My System Shows Up

Page 181

Appendix C: Troubleshooting

If you decide not to ping for availability and the controller is off-line, or you have an incorrect TCP/IP address, the program will try for 30-45 seconds to establish a connection.

Only One Modero Panel In My System Shows Up

Symptom: I have more than one Modero panel connected to my System Master and only one shows up.

Multiple NetLinx Compatible devices, such as MVP panels, can be associated for use with a single Master. Each panel comes with a defaulted Device Number value of 10001. When using multiple panels, different Device Number values have to be assigned to each panel.

1.Press and hold the two lower buttons on both sides of the display for 3 seconds to open the Setup page.

2.Press the Protected Setup button (located on the lower-left of the panel page), enter 1988 into the on-screen Keypad’s password field, and press Done when finished.

3.Enter a Device Number value for the panel into the Device Number Keypad. The default is 10001 and the range is from 1 - 32000.

Panel Behaves Strangely After Downloading A Panel File Or Firmware

Symptom: After downloading a panel file or firmware to a G4 device, the panel behaves strangely.

If the panel already contains a large enough file, subsequent downloads will take up more space than is available and could often corrupt the Compact Flash. The demo file that typically ships with G4 panels is one such file.

Symptoms include:

Having to repeat the download.

Inability to make further downloads to the panel. May get "directory" errors, "graphics hierarchy" errors, etc., indicating problems with the Compact Flash.

Panel will not boot, or gets stuck on "AMX" splash screen.

Other problems also started after downloading to a new panel or a panel with a TPD4 file that takes up a considerable amount of the available Compact Flash.

1.DO NOT download TPD4 files (of large size) over the demo pages, or any other large TPD4 file.

2.First download a small blank one page file to the G4 panel using the Normal Transfer option to send/download the page.

3.Reboot the device.

4.Do your regular file or firmware download.

MVP-5200i Modero Viewpoint Widescreen Touch Panel	173

Image 181

Contents MVP-5200i AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Configuring Communication Programming Appendix a Text Formatting 155 Introduction MVP-5200i Specifications FG5966-01, FG5966-02 Memory Included AccessoriesPanel LCD Parameters External ComponentsMemory Table Charging Station Connector LocationsOther AMX Equipment Navigation Wheel Basic OperationIntercom Microphone Cleaning the Touch Overlay, Case, and Navigation Wheel Power ManagementStylus Kick Stand Audio/Video CapabilitiesMVP-TCS-52 Specifications Powering the MVP-TCS-52Table Charging Station Cleaning the MVP-TCS-52 Connections and WiringRecharging Wall Charging Station MVP-WCS-52 SpecificationsComponents Front PanelRecharging Unlocking the touch panelInstalling the Plastic Conduit Box Installing the MVP-WCS-52All lockdown wings folded flat during installation Tie-Wrap Anchors Mini-Captive Wire Connector Plug female MVP-WCS-52 Typical Metal Conduit Box Installation Installing the Optional Metal Conduit BoxConfiguring Communication IR transmitter window on the MVP-5200i-GW IR CommunicationAccessing the Setup and Protected Setup Pages Modero Setup and System SettingsSetting the Panel’s Device Number Wireless Settings Wireless Access OverviewConfigure the Device’s Wireless IP Settings Configuring Wireless Network AccessWireless communication using a Dhcp Address Wireless communication using a Static IP Address Site Survey Using the Site Survey toolConfiguring Communication Site Survey of available Waps Unsecured WAP shown selected Configure the Card’s Wireless Security SettingsSame as Abc Manually setting Ssid Automatically setting SsidRequired Information WEP Passphrase Keyboard Configuring Communication Ethernet over USB Choose a Master Connection ModeFound New Hardware Wizard dialogue box Touch panel setupNext box , make sure to Completing the Found New Hardware Wizard Select Use the following IP Address Configure a Virtual NetLinx Master using NetLinx StudioCommunications Settings dialog box Ethernet Mode Description ProceduresConnection Modes Master Connection to a Virtual Master via Ethernet Start Run cmd command Ethernet G4 Web Control Using G4 Web Control to Interact with a G4 PanelConfiguring Communication Using the NetLinx Master to control the G4 panel Web Control VNC installation and Password entry screens Configuring Communication Page Setup Setup PagesNavigation Buttons Timeout Display TimeoutConnection Status Inactivity Page FlipNavigation Buttons Protected Setup PagesProject Information Information ButtonProject Information Purchase Order Sales OrderAMX IR 38K Assigned PortPanel Information Panel InformationTime & Date Setup Time & Date SettingsAudio Settings Audio SettingsMaster Volume Default Panel SoundsSupported WAV Sample Rates WAV files Supported sample ratesAnalog Battery Battery SettingsBattery Power Brightness Limit Page Device Number Protected SetupOptions Reboot/Shutdown Panel System RecoveryDocking Station Protected Setup Navigation Buttons Protected Setup Navigation ButtonsSystem Settings Page Elements System SettingsIP Settings Master ConnectionEthernet Only disabled when USB is selected System Setting Page ElementsWireless Settings Wireless SettingsWireless Security Access Point MACAddress Network Name Ssid WAP namesRF Link Info EAP-TLSWireless Security Support Wireless Security802.11g Wi-Fi CF card Open Clear Text Settings Open Clear Text SettingsSave/Cancel Static WEP Settings Static WEP SettingsWEP 64 / WEP Authentication Default KeyGenerate Passphrase WEP KeysWPA-PSK Settings WPA-PSK SettingsPassword/Pass Phrase EAP-PEAP EAP-TTLS EAP-TLS EAP Security & Server Certificates OverviewWireless Settings page EAP-LEAP Settings EAP-LEAP SettingsPassword EAP-LEAP SettingsIdentity EAP-FAST Settings EAP-FAST SettingsAnonymous Identity Been DisabledAutomatic PAC ProvisioningWireless Settings page EAP-PEAP Settings EAP-PEAP SettingsInner Authentication Type EAP-PEAP SettingsCertificate Authority Peap VersionEAP-TTLS Settings EAP-TTLS SettingsSsid Service Set Identifier Anonymous@amx.com EAP-TLS Settings EAP-TLS SettingsClient Certificate Private Key passwordPrivate Key Client Certificate Configuration Client certificate configurationCertificates and their Extensions Certificate Types Supported by the Modero FirmwareCalibration CalibrationG4 Web Control Settings G4 Web Control SettingsG4 Web Control Timeout G4 Web ControlProtected Setup Pages Cache Settings Other SettingsCache Settings Image Cache SettingsPassword Setup Password SettingsProtected Setup Pages Panel Connection Logs ToolsPanel Connection Logs Panel Statistics Panel StatisticsConnection Utility Connection UtilityConfigure the panel for a USB Connection Type Scale Images For Setup PagesUpgrading the Modero Firmware via the USB port Prepare Studio for communication via the USB port Confirm and Upgrade the firmware via the USB port Upgrading Firmware Using USB for a Virtual Master transfer Network Connections window Special Note for Network Interface ConnectionsAdvanced Settings window 100 MVP-5200i Modero Viewpoint Widescreen Touch Panel Commands CommandsOverview Navigation Wheel Programming@PDR @DPG@PHE @PHPCommands @PPN @PPM@PPT @PPX@PSP @PSE@PST Ppog PpofPpon RGB triplets and names for basic 88 colors Programming NumbersRGB Values for all 88 Basic Colors Index No Name Red Green Blue108 MVP-5200i Modero Viewpoint Widescreen Touch Panel Font styles and ID numbers Default Font Styles and ID NumbersFont ID Font type Size Border Styles and Programming Numbers Border styles and Programming numbersTPD4 Border Styles by Name Border stylesMVP-5200i Modero Viewpoint Widescreen Touch Panel 111 112 MVP-5200i Modero Viewpoint Widescreen Touch Panel Button Commands Button CommandsANI APFBCB BAUBCF BDO BCTBFB Entry is required BIMBLN BMC Sendcommand Panel,BMC-150,1,1,315,1,%BR%FT%TX%BM%IC%CF%CTBMF-vt addr range,button states range,data BMFCont BML BMIBMP BNCBNT BNNBOP BOS BORBPP BSF BRDBSM BSOBVN BVLBVP BVTDLD CPFDPF ENAGDI FONGIV GLL GLHGRD GRUICO GSNIRM JSI JSBMBT JSTPass data MDCTEF TECEffect names TXTMVP Panel Lock Passcode Commands MVP Panel Lock Passcode commandsMiscellaneous MVP Strings back to the Master MVP Strings to MasterText Effects Text Effects NamesLPR LPSDefineevent Button Query CommandsSend Command Panel,?BCB-529,1 Button Query CommandsCustom Event Fields ?BCB?BCT ?BCF?BOP ?BMP?BWW ?BRD?ICO ?FON?JSI ?JSB?TEC ?JSTSend Command Panel,?TXT-529,1 Send Command Panel,?TEF-529,1?TEF ?TEF-vt addr range,button states rangePanel Runtime Operations Panel Runtime Operation Commands@AKR @AKPBeep Brit@EKP SetupPkeyp @PKP@TKP @SOUTpageon TpageoffInput Commands Input CommandsCAL KPSEmbedded Codes Embedded codesDecimal numbers Hexidecimal values Virtual keystroke Panel Setup Commands Panel Setup CommandsDynamic Image Commands Dynamic Image CommandsHost ’%Hhost’ File ’%Ffile’ Description RAF-resource name,dataPage Battery Life and Replacement Screw placement at the back of the MVP-5200i- GW Battery ReplacementMVP-5200i Modero Viewpoint Widescreen Touch Panel 155 Page Bargraph Text Code Inputs Text Formatting Codes for Bargraphs/JoysticksFormatting Code Operations ExampleInput mask character types Text Area Input MaskingCharacter Types Character Masking RuleInput mask next field characters Input mask rangesInput mask operations Input mask literalsOutput Examples Input mask output examplesCommon Name Input Mask Special escape sequences URL ResourcesEscape Sequences Sequence Panel InformationOverview of Wireless Technology Appendix B Wireless Technology802.1x TerminologyWEP WPA2 EAP characteristics EAP AuthenticationEAP Method Characteristics Method Credential Type Authentication Pros ConsLAN EAP communication overviewSetup the Panel and PC for USB Communication Configuring your MVP-5200i for USB CommunicationAMX Certificate Upload Utility Confirm the Installation of the USB Driver on the PC How to Upload a Certificate File Panel Doesn’t Respond To Touches Battery Will Not Hold Or Take a ChargeMVP Can’t Obtain a Dhcp Address MVP-5200i Isn’t Appearing In The Online Tree TabMy WEP Doesn’t Seem To Be Working NetLinx Studio Only Detects One Of My Connected MastersOnly One Modero Panel In My System Shows Up Page Page It’s Your World Take Control

Related manuals

Manual 188 pages 10.9 Kb