USB Interface Connection
Your touchmonitor comes with one USB cable. (For use with Windows 2000, ME, and XP systems only.)
To set up the monitor, please refer to the following figures and procedures:
Remove the Cable Cover
The cables are connected at the back of the monitor.
CAUTION: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off.
To remove the cable cover, place your thumbs at the top corners of the cable cover where the indents are (above the arrows). Gently press and pull the cover toward yourself.
NOTE: Before connecting the cables to the touchmonitor, route all the cables that you will be using through the hole in the base as shown in the picture above. Only use one of the following: Serial or USB touch cable and
User Manual: 1528L
SW200095 Rev A, Page 15 of 39