Chapter 5: Native Resolution
The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the Elo Touch Solutions LCD touchmonitor, the native resolution is 1024 x 768 for the 15.0 inch size. In almost all cases, screen images look best when viewed at their native resolution. You can lower the resolution setting of a monitor but not increase it.
Input Video | 15.0" LCD | |
640x480 | (VGA) | Transforms input format to |
|
| 1024x768 |
800x600 | (SVGA) | Transforms input format to |
|
| 1024x768 |
1024x768(XGA) | Monitor in Native Resolution | |
The native resolution of an LCD is the actual number of pixels horizontally in the LCD by the number of pixels vertically in the LCD. LCD resolution is usually represented by the following symbols:
VGA 640x480
SVGA 800x600
XGA 1024x768
As an example, a SVGA resolution LCD panel has 800 pixels horizontally by 600 pixels vertically. Input video is also represented by the same terms. XGA input video has a format of 1024 pixels horizontally by 768 pixels vertically. When the input pixels contained in the video input format match the native resolution of the panel, there is a one to one correspondence of mapping of input video pixels to LCD pixels. As an example, the pixel in column 45 and row 26 of the input video is in column 45 and row 26 of the LCD. For the case when the input video is at a lower or higher resolution than the native resolution of the LCD, the direct correspondence between the video pixels and the LCD pixels is lost. The LCD controller can compute the correspondence between video pixels and LCD pixels using algorithms contained on its controller. The accuracy of the algorithms determines the fidelity of conversion of video pixels to LCD pixels. Poor fidelity conversion can result in artifacts in the LCD displayed image such as varying width characters.
User Manual: 1528L
SW200095 Rev A, Page 24 of 39