Explaination of Symbols
Symbol Description
UL Classification means that UL has tested and evaluated samples of the product with respect to certain properties of the product. (look on page 9 )
For those EU Directives that permit it, the CE mark indicates product compliance with standards indicated in the "Certificate of Conformance" which accompanies the product packing information. The Directive may or may not require verification by a Notified Body. The LVD, EMC and MDD Directives permit products to indicate conformity by the CE mark. MDD products may also require a Notified Body mark.
Indicates tested to comply with FCC standards.
Indicates compliance with the European Community WEEE directive 2002/96/EC. Dispose of according to federal, state or local regulations.
This symbol alerts the user to consult accompanying documents for important information concerning the operation and maintenance of this unit, which should be read carefully to avoid problems.
EMC Guidance
Guidance and manufacturer’s declaration – electromagnetic emissions
The 1528L is intended for use in the electromagnetic environment specified below. The customer or the user of the 1528L should assure that it is used in such an environment.
Emissions test | Compliance | Electromagnetic environment – guidance |
|
|
|
RF emissions | Group 1 | The 1528L uses RF energy only for its internal function. Therefore, its RF |
CISPR 11 |
| emissions are very low and are not likely to cause any interference in nearby |
|
| electronic equipment. |
|
|
|
RF emissions | Class B |
|
|
|
|
Harmonic | Not applicable |
|
emissions |
|
|
|
| |
|
|
|
Voltage | Complies |
|
fluctuations/ |
|
|
flicker emissions |
|
|
|
| |
|
|
|
User Manual: 1528L
SW200095 Rev A, Page 6 of 39