Quick Reference
;CDC
Switches to changer operation (only if a changer is connected).
If there is no changer, the system will switch to AUX as long as AUX ON is switched on in the DSC menu.
<CD
Switches to CD operation
=TU (TUNER)
Switches to radio operation. Switches to the memory levels/bands FM I, FM II, FMT (Travelstore), AM and AMT (Travelstore).
>CD insert
When the CD is inserted with the label facing up, it will be automatically trans- ported into the operating position. The unit will automatically switch to CD play.
?Visual theft protection
The following conditions must be ful- filled before the light diode will flash as a visual indication of theft protection: The unit is switched off;
The ignition is switched off;
The operating panel is folded down; The KeyCard has been removed;
The DSC menu settings is switched to LED ON (factory setting).
For more information, refer to “DSC programming, LED ON/OFF”.
@KeyCard theft protection system The KeyCard must be inserted before the unit can be operated.
KeyCard
Inserting the KeyCard
Press 1 to unlock the operating pan- el; it will fold down forwards.
Insert the KeyCard with the contact points facing down (see illustration). Lock the operating panel.
2
1
3
Perform these steps in the reverse or- der to remove the KeyCard.
Make sure to read the information in the section on “KeyCard theft protec- tion system”.
AEject
Press the CD eject button briefly and the CD will eject.
For safety’s sake, the operating panel must remain locked when the vehicle is in motion.
When you leave the vehicle, un- lock the panel and remove the KeyCard to protect the equipment against theft.
10