KeyCard theft protection system

•Remove the first KeyCard and insert the new one while “CHANGE” still ap- pears in the display.

After the display indicates “LEARN OK” or “LEARN KC”,

•press DSC.

Now you can also use the new KeyCard for operating your unit.

A maximum of two cards can be used with the set.

If you attempt “train” a third Card, the ac- cess authorization for the KeyCard not used for the “training” process will be deleted au-

	Short Additional Memory	Switching off the flashing light diode
	(S.A.M.)	The flashing light can be switched off by
	The second KeyCard can be programmend	selecting “LED OFF” in the DSC menu.
	by your dealer to read out short information,	Care of your KeyCard
	which will run through the display, for ex-
	ample, the phone number of your car deal-	To ensure that the KeyCard will function
	er or the emergency call number of your
		properly it is important that the contacts are
	automobile association.
		free from any foreign particles. Avoid direct
	The selectable text with a maximum of 162
		skin contact.
	characters can be programmed by any deal-
		If necessary, clean the KeyCard contacts
	er who has the required programming equip-
		using a cotton swab soaked in rubbing al-
	ment available.
		cohol.

tomatically.

Displaying the radio data

You can use the KeyCard supplied with your set to display the radio pass data such as the model name, product number (7 6 ...) and serial number.

Please refer to the section on “DSC pro- gramming - READ KC”.

Optical display as theft protec- tion

Flashing light diode ?

When the vehicle is stationary and the Key- Card has been removed, the light diode can be switched to flash for extra anti-theft se- curity.

For this it is necessary that the positive pow- er supply line and the permanent +12 V lead are connected such as described in the in- stallation instructions.

Make sure that the unit is switched off; the operating panel is unlocked; the KeyCard has been removed; “LED ON” has been selected in the DSC mode (factory setting). If necessary, please refer to the section on “DSC programming - LED”.

Lost or damaged KeyCard

If the KeyCard for your unit is lost or dam- aged you can train a new KeyCard.

You can purchase the new KeyCard from any authorized dealer. You will also require the master code for the unit, which you will get from your authorized dealer.