Blaupunkt Tokyo RDM 169 Storing program types, Scanning stations with PTY Scan

Page 21

Radio operation with RDS (Radio Data System)

If the radio is unable to find a station offer- ing the selected program type, the display will show “NO PTY” and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated.

You can assign different program types to each preset position. Please refer to the next section on “Storing program types”.

b)Using the << >> buttons on the rocker switch

When PTY is switched on, you can se- lect a program type using buttons

<< >>.

•Press << or >>; the program type se- lected last will be displayed for 3 seconds.

•During this period press >> (for- wards) or << (backwards) to select the desired type.

•Press << or >> as many times as re- quired.

If you would like to listen to a station with the selected PTY,

•press / to start the seek tuning function.

If the radio is unable to find a station offer- ing the selected program type, the display will show “NO PTY” and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated.

Storing program types

Each of the preset buttons ST1 - ST6 has been assigned one program type at the fac- tory.

If desired, you can also replace these with other available program types.

To do so, make sure that “PTY” lights up in the display.

•If necessary, press the PTY button to switch on the function.

•Select a program type using buttons << >> and

•hold down the desired preset button (ST1-ST6) until you hear a beep.

Now the selected program type can be re- called by pressing this preset when PTY has been activated. (“PTY” appears in the dis- play.)

Scanning stations with PTY SCAN

Requirement: “PTY” must appear in the dis- play.

•Press the SCA button.

All of the stations in your current reception area offering the selected program type will be scanned.

To switch off PTY-SCAN:

•Press SCA or the seek-tuning rocker switch once again.

After the entire band has been scanned, the PTY-SCAN function will be turned off auto- matically.

ENGLISH

21

Image 21

Contents Tokyo RDM 13 12 Table of contents Quick Reference Next FM Quick ReferenceNext AM BNDExit PTYMIX Rocker switch RPT RepeatCLR AUD DSC-MODE PTY DPEDisplay DIS= TU Tuner CDCRadio operation Station seek tuning up Steering wheel remote control unit optionalSRC Source Select trackImportant notes Putting the unit into operation KeyCard theft protection systemRemoving the KeyCard Training a KeyCard/Replacing a KeyCardKeyCard theft protection system Selecting the operating Optimizing display Mode Legibility AF Alternative frequency Radio operation with RDS Radio Data SystemSelecting a band Activating/deactivating the RDSRadio operation with RDS Radio Data System Station tuningChanging the memory bank Scrolling through the broadcast- ing networks FM onlyScanning stored stations with Preset Scan To start Preset ScanRecalling stored stations Selecting the seek tuning sensi- tivity Switching from stereo to monoScanning stations with Radio Scan Changing the scan timeProgram type PTY Program TypeNews Sports Talk Rock CLS Rock Adlt HIT Soft RockScanning stations with PTY Scan Storing program typesPTY priority Switching on CD changer opera- tion Switching on CD operationCD operation / CD changer operation Inserting a CDCD operation / CD changer operation Selecting the display modeSelecting CDs and titles Repeating tracks/CDsMIX OFF MIX CDEntering CD names Deleting CD names/TPM withTo stop the Scan function Correcting the clock after the power has been disconnected Setting the clockClock Time Displaying the clockSetting the equalizer Assistance in setting your equalizer Setting the equalizerLOW EQ DSC programmingHicut High EQDSC programming 12/24H ModeSTEREO/MONO CLK AUTO/MANPeak ON/OFF To quit the DSC programming mode and store the adjustmentOverview of the DSC factory set- tings DSC programming SpecificationsAmplifier TunerGlossary Technical Terminology MuteScan BND IndexSharx TPM IndexBosch Gruppe