Putting the unit into operation

KeyCard theft protection system

DEUTSCH

This car radio comes equipped with one KeyCard, but it can also be operated with a second card.

If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer.

If you use two KeyCards, the settings stored on the first card will be transmitted to the second. However, you can individually store the following functions:

Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep vol- ume, LOW-EQ, HIGH-EQ.

In addition, the settings activated before the radio is switched off, such as the waveband, station, TA priority, AF, REG ON/OFF, SCANTIME, seek tuning sensitivity, ON VOL and SHARX will also remained stored.

This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard.

•Turn on the set with ON.

To insert the KeyCard, unlock the operating panel by

•pressing 1, the operating panel will fold down.

•Insert the KeyCard with the contacts facing down as shown in the illustra- tion (arrow 1).

•Push the card in the direction of the ar- row (2) and lock the operating panel back into position (arrow 3).

The car radio is now ready for operation.

If a wrong KeyCard is inserted, then “CARD ERR” will appear in the display.

The system will switch off after approximate- ly ten seconds.

If another card type is inserted (e.g. phone or credit card), the display will show “WRONG KC” for approximately two sec- onds.

Remove the wrong card and insert the cor- rect KeyCard.

•Press ON to turn on the set.

	Removing the KeyCard
	To unlock the operating panel:
	• Press 1, the operating panel will fold	ENGLISH
	down forwards.
	• Push the card in to the right as far as
	• Push the card in to the right as far as
	possible and remove it to the front.
	• Push the operating panel back into po-	FRANÇAIS
	sition.
	For safety’s sake, the operating
	For safety’s sake, the operating
	panel must remain locked when	ITALIANO
	the vehicle is in motion.
	When you leave the vehicle, un-
	lock the panel and remove the
	lock the panel and remove the
	KeyCard to protect the equipment	NEDERLANDS
	against theft.
	“Training” a second KeyCard/
	Replacing a KeyCard
	When the unit is in operation with the first
	KeyCard, you can “train” a second one to
	be also used with the set.	SVENSKA
	be also used with the set.
	If you want to “train” a second KeyCard:	ESPAÑOL
	• Insert the first KeyCard and turn on the
	set.
	• Press the DSC button and press /
	• Press the DSC button and press /
	to select “LEARN KC”.	PORTUGUÊS
	• Press << or >>.
	The display will switch to “CHANGE”.

DEUTSCH