Quick Reference
3Adjusting the volume
Turn the knob to adjust the volume as desired.
The volume level selected will appear in the display. When the unit is switched on, it will automatically play at the
It is possible to adjust the ON VOL (re- fer to “DSC programming - ON VOL”).
4Softkeys / Display
Softkey = key with different functions The functions which appear in the dis- play can be selected.
Radio operation
While listening to the radio you can press TU to switch between menu lev- el 1 and menu level 2.
The unit will return to menu level 1 au- tomatically 8 seconds after the last key is pressed.
Menu level 1
Station keys and memory levels
NEXT - FM
Switches between the memory levels for FM I, FM II, FM T.
NEXT - AM (MW, LW)
Switches between the MW and LW wavebands.
ST1 - ST6
On this memory level it is possible to store radio stations on the FM levels I, II and “T” on the keys marked ST1 to ST6. 6 stations each can be stored for the MW and LW wavebands.
Storing a radio station - Press one of the station keys from ST1 to ST6 until it is possible to hear the program again (beep).
Recalling a radio station - Select the desired waveband. For FM press NEXT to select the memory level re- quired and press the corresponding station key briefly.
Menu level 2
Adjusting the radio functions
NEXT - FM
Switches between the memory levels for FM I, FM II, FM T.
NEXT - AM (MW, LW)
Switches between the MW and LW wavebands.
BND
Selects the waveband and memory level (FM I, FM II, FM T, MW, LW).
SCA - Scan
a) PTY is switched off
(lettering is lit normally, not highlighted in the display)
Press SCA briefly (Radio Scan) - “SCAN” will flash in the display alter- nately with the abbreviation for the sta- tion being scanned. All of the radio stations within reception range will be scanned.
46