Blaupunkt RCM 169 Care of your KeyCard, Lost or damaged KeyCard, Training the new KeyCard

Page 16

KeyCard theft protection system

Care of your KeyCard

To ensure that the KeyCard will function properly it is important that the contacts are free from any foreign particles. Avoid direct skin contact.

If necessary, clean the KeyCard contacts using a cotton swab soaked in rubbing al- cohol.

Lost or damaged KeyCard

If the KeyCard for your unit is lost or dam- aged you can train a new KeyCard.

You can purchase the new KeyCard from any authorised dealer. You will also require the master code for the unit, which you will find in the radio pass.

Always keep the radio pass in a safe place. Do not leave it in your vehicle.

Training the new KeyCard

•Insert the new KeyCard into the unit and lock the operating panel into posi- tion.

•Press ON.

•Within the next 5 seconds, press TU and ST1. “0000” will appear in the dis- play.

•Now use the rocker switch to enter the four-digit master code in the radio pass:

/ - Enter digits (press as often as required)

<< / >> - Select the entry position.

•Press ENT after you have entered the correct master code.

The new KeyCard has been accepted when the unit switches to play.

Making mistakes in the entry

If you enter the wrong code, “CODE-ERR” will appear in the display. If you enter the wrong code three times, “WAIT 1h” will ap- pear in the display. The unit will switch to a standby mode for one hour.

•Switch the unit off and on again.

Repeat the steps to train the new KeyCard, but be sure to enter the correct master code.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

57

Image 16

Contents Operating instructions 13 12 Table of contents Quick Reference Quick Reference Next FMNext AM MW, LW BNDExit PTYDolby B NR RPT RepeatMIX Rocker switch Radio operation CLRAUD DSC-MODE PTYDIS Display RPTCDC = TU TunerRC 08 remote control unit Important notes Putting the unit into operation Removing the KeyCardTraining a second KeyCard Replacing a KeyCardKeyCard theft protection system Short Additional MemoryTurn On Message T.O.M Displaying the radio pass dataCare of your KeyCard Lost or damaged KeyCardTraining the new KeyCard Making mistakes in the entrySelecting the operating Optimising display Mode Legibility AF Alternative frequency Radio operation with RDS Radio Data SystemREG regional program Station tuning Radio operation with RDS Radio Data SystemSelecting a waveband Scrolling through the broadcast- ing networks FM onlyChanging the memory bank FM Storing stationsRecalling stored stations MW, LWScanning stored stations with Preset Scan Scanning stations with Radio ScanSwitching from stereo to mono PTY Program TypeProgram type NewsChecking the program type of the sta- tion Displaying the selected program typeSelecting a program type Storing program typesNDR Scanning stations with PTY ScanPTY priority Page Cassette operation Cassette operation Scanning cassette titles withTrack reverse RemainRepeating titles with RPT Listening to the radio while fast Forwarding or rewinding the tapeWith Radio Monitor RM Fast tape forward/rewindSwitching on CD changer opera- tion Changer operationSelecting CDs and tracks Selecting the CD upSwitching TPM playback on/off Changer operationRepeat tracks/CDs with RPT Storing tracks with TPMEntering CD names MIX CDMIX MAG MIX OFFDSC Update Deleting CD names/TPM withSetting the clock Correcting the clock after the power has been disconnectedClock Time Displaying the clockSetting recommendations on Setting the equaliserInternet Setting the equaliser Assistance in setting your equaliserDSC programming CD Name Sharx Hicut12/24H Mode DSC programmingSTEREO/MONO CLK AUTO/MANDate Peak ON/OFFDSC programming Specifications Overview of the DSC factory set- tingsAmplifier TunerGlossary Technical Terminology MuteREG Glossary Technical TerminologyScan Index CPS Scan IndexTPM Blaupunkt-Werke GmbH

Related manuals

Manual 50 pages 26.41 Kb