Blaupunkt 2000 DJ, RCM 169 Selecting the operating Optimising display Mode Legibility

Page 17

Selecting the operating	Optimising display
mode	legibility

You can select the following operating modes: Radio (TU), Cassette (CC) and CD changer (CDC).

CCcannot be selected unless a cassette has been inserted.

CDC cannot be selected unless one of the Blaupunkt changers, the A 06, the A 072, the A 08, the A 05, or the A 071 has been connected and there is at least one CD in the magazine.

To switch the operating mode:

•press TU, CC or CDC.

If you press TU again, the unit will switch to menu level 2. On this level it is possible to adjust the functions for radio operation. The unit will switch back to menu level 1 auto- matically approx. eight seconds after the last adjustment was made.

The viewing angle of the display can be al- tered to allow optimum legibility.

•Press DSC.

•Press the lower part of the rocker switch until “ANGLE” appears in the display.

•Press << / >> to set the best viewing angle for your position.

When you have completed the setting

•press DSC.

Image 17

Contents Operating instructions 13 12 Table of contents Quick Reference Next FM Quick ReferenceNext AM MW, LW BNDPTY ExitMIX RPT RepeatDolby B NR CLR Rocker switch Radio operationDIS DSC-MODE PTYAUD RPT Display= TU Tuner CDCRC 08 remote control unit Important notes Removing the KeyCard Putting the unit into operationTraining a second KeyCard Replacing a KeyCardShort Additional Memory KeyCard theft protection systemTurn On Message T.O.M Displaying the radio pass dataLost or damaged KeyCard Care of your KeyCardTraining the new KeyCard Making mistakes in the entrySelecting the operating Optimising display Mode Legibility REG regional program Radio operation with RDS Radio Data SystemAF Alternative frequency Radio operation with RDS Radio Data System Station tuningSelecting a waveband Scrolling through the broadcast- ing networks FM onlyStoring stations Changing the memory bank FMRecalling stored stations MW, LWScanning stations with Radio Scan Scanning stored stations with Preset ScanPTY Program Type Switching from stereo to monoProgram type NewsDisplaying the selected program type Checking the program type of the sta- tionSelecting a program type Storing program typesPTY priority Scanning stations with PTY ScanNDR Page Cassette operation Scanning cassette titles with Cassette operationTrack reverse RemainForwarding or rewinding the tape Repeating titles with RPT Listening to the radio while fastWith Radio Monitor RM Fast tape forward/rewindChanger operation Switching on CD changer opera- tionSelecting CDs and tracks Selecting the CD upChanger operation Switching TPM playback on/offRepeat tracks/CDs with RPT Storing tracks with TPMMIX CD Entering CD namesMIX MAG MIX OFFDeleting CD names/TPM with DSC UpdateCorrecting the clock after the power has been disconnected Setting the clockClock Time Displaying the clockInternet Setting the equaliserSetting recommendations on Assistance in setting your equaliser Setting the equaliserCD Name Sharx Hicut DSC programmingDSC programming 12/24H ModeSTEREO/MONO CLK AUTO/MANPeak ON/OFF DateOverview of the DSC factory set- tings DSC programming SpecificationsAmplifier TunerMute Glossary Technical TerminologyScan Glossary Technical TerminologyREG Index TPM IndexCPS Scan Blaupunkt-Werke GmbH

Related manuals

Manual 50 pages 26.41 Kb