Radio operation with RDS (Radio Data System)
Changing the memory bank (FM)
You can shift between the memory banks I,
IIand T in order to store stations and recall them later. The currently selected memory bank is indicated in the display.
•Press NEXT as often as necessary un- til the desired memory bank lights up in the display.
•Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds, con- firmed by a beep).
Now the station has been stored.
Note:
Should you tune into a station which has already been stored before on another mem- ory bank, the corresponding preset button and the memory bank will flash briefly in the display.
Storing stations
On FM, you can store six stations on the preset buttons ST1 - ST6 for each of the memory banks I, II and T.
On MW/LW, you can also store six stations each.
•Press TU, menu level 2 will appear in the display.
•Press BND to select the waveband.
•Use the rocker switch to tune into a station (either automatically 
/
or manually << >>).
Automatically storing the strongest stations with Travel- store
You can automatically store the six most powerful FM stations in your current recep- tion area sorted according to their signal strength. This function is particularly con- venient on longer trips.
•Press TU, menu level 2 will appear in the display.
•Press TS briefly.
The six strongest FM stations will be auto- matically stored on the memory bank T (Travelstore). If it is not possible to receive six stations, the remaining presets will be marked by four dashes. When this process
has been completed, the radio will play the | DEUTSCH | |
station with the strongest reception (ST 1). | ||
| ||
If desired, stations can also be stored man- | ENGLISH | |
ually on the Travelstore bank (see “Storing | ||
stations”). | ||
|
Recalling stored stations
You can recall any stored station at the touch | FRANÇAIS | |
of a button. | ||
FM | ||
| ||
Recall the stations on the waveband select- | ITALIANO | |
ed directly: | ||
• by pressing ST1 - ST6. | ||
To select a station on a different waveband: |
| |
| ||
NEDERLANDS | ||
• Press NEXT as often as necessary un- | ||
| ||
til the desired memory bank appears |
| |
and then select the station by pressing |
| |
ST1 - ST6. |
| |
| ||
| SVENSKA | |
|
| |
|
| |
| ESPAÑOL | |
MW, LW |
| |
| ||
PORTUGUÊS | ||
You can select the stations stored for the | ||
| ||
selected waveband directly: |
| |
|
|
61