Blaupunkt RCM 126 KeyCard theft protection system, Removing the KeyCard, Replacing a KeyCard

Page 11

KeyCard theft protection system

This car radio is supplied with one KeyCard

ERR” will appear in the display. In this case

• Press << or >>.

as standard, though it can also be operated

please do not make any further adjustments.

The display will switch to “CHANGE”.

with a second card.

 

 

The system will switch

off after approxi-

• Push in the KeyCard. The card is re-

If you have lost your KeyCard or if it was

mately ten seconds.

 

 

leased and put in the proper position

damaged, you can buy a new one from your

When inserting another

card type (e.g.

for being removed.

specialised dealer.

 

 

phone or credit card), the display will show

 

 

• Remove the first KeyCard and insert

When

using two KeyCards,

the

settings

“WRONG KC” for approximately two sec-

stored

on the first card will

be

adopted.

onds.

 

the new one while “CHANGE” is still

 

being displayed.

However, you can individually store the fol-

Remove the wrong card and introduce the

After the display indication “READY” or

lowing functions:

 

 

correct KeyCard.

 

 

 

 

 

Preset button assignments, bass, treble,

After the display indications “CARD ERR” “LEARN KC”,

balance and fader settings, Loudness, TA

or “WRONG KC”:

 

• press DSC.

(traffic announcement volume), beep vol-

• Press ON to turn on the set.

Now you can also use the new KeyCard for

ume.

 

 

 

 

 

operating your unit.

In addition, the settings activated before

Removing the KeyCard

A maximum of two cards can be used for

switching the radio off, such as the wave-

Never pull out the KeyCard directly!

the set.

band, station, TA priority, AF, REG ON/OFF,

When trying to “train” a third one, the ac-

SCANTIME, seek tuning sensitivity and VOL

First, slightly push in the KeyCard.

cess authorisation for the KeyCard not used

FIX will also remained stored.

 

 

This releases the card and puts it in the

for the “training” process will be deleted

This ensures that you will find your basic

proper position for being removed.

automatically.

settings re-adjusted automatically as soon

• Now you can pull it out.

 

as you have inserted your KeyCard.

“Training” a second KeyCard/

Displaying the radio pass data

Putting the unit into operation

Using the KeyCard supplied with your set

Replacing a KeyCard

you can have the radio pass data such as

 

 

 

 

 

 

• Turn on the set.

 

 

While operating the unit with the first Key-

the model name, product number (7 6 ...)

Introduce the KeyCard into the slot

Card, you can “train” a second one to be

and serial number indicated on the display

with the contact area showing up

also used with the set:

 

panel.

(KeyCard tongue sticking out).

 

• Insert the first KeyCard and turn on the

Please refer to chapter “DSC programming

The car radio is now ready for operation.

set.

 

- READ KC”.

If a wrong KeyCard is inserted, then “CARD • Press the DSC button and select “LEARN KC” with /.

36

Image 11
Contents Heidelberg RCM Page Contents Quick reference AUD J GEO DSC Mode H PTY Rocker switchExtra rocker switch functions Flashing KeyCard tongue DisplayMIX OFF MIXMIX CD MIX MAG@ DIS AUD Extra function GEOImportant notes Never pull out the KeyCard directly KeyCard theft protection systemRemoving the KeyCard Replacing a KeyCardOptical indication for extra security Switching off the flashlightShort Additional Memory S.A.M Turn On Message T.O.MRadio operation with RDS Radio Data System Automatically storing the stron Scrolling through the broad- casting networksChanging the memory bank Storing stationsRecalling stored stations Selecting the seek tuning sensi- tivityPreset Scan Switching from stereo to monoNews Programme typePTY priority Storing programme typesScanning stations with PTY-SCAN On/off Automatic seek tuning startSwitching the warning beep off Receiving traffic programme stations with RDS-EONTape operation Dolby B NR Switching the tape sideScanning cassette titles with Skipping unrecorded tape Portions with Blank SkipSelecting CDs and titles Switching to CDC operationCD changer operation optional Care notesEntering CD names Selecting the display modeStoring the display mode MIX playbackDeleting CD names with DSC programmingColour AUX ScantimeAppendix Overview of the DSC factory settingsSpecifications Blaupunkt-Werke GmbH
Related manuals
Manual 31 pages 21.97 Kb Manual 33 pages 27.68 Kb