Colour

CDC NAME Only available for CD chan- ger playback (optional). Use this function to name your CDs. (See “Entering CD names”).

LOUDNESS Loudness - When listening at a low level, the Loudness function creates a more nat- ural sound by boosting the low frequency range. LOUD 1 - Low boost LOUD 6 - Max. boost

TA VOL To adjust the traffic an- nouncement and warning beep volume from between 0 to 63.

The message will then come through at this volume, if the standard volume is lower.

Should the standard volume be higher than the TA VOL level, then the traffic report will be played slightly louder than the standard volume.

SPEECH In future many RDS radio stations will differentiate be- tween music and speech programmes.

You can alter the tone for speech programmes from between “SPEECH 0 ... 4”.

SPEECH 0:

Music/speech off

SPEECH 1:

Linear reproduction (bass, treble and Loudness set to “0”)

SPEECH 2-4:

Different settings for vol- ume, bass and treble with the Loudness being switch- ed off.

Try out which SPEECH set- ting you like most.

BEEP Acknowledgement tone for all functions which require a button to be pressed for more than one second.

The volume can be adjusted from between 0 to 9. (0 = off).

ANGLE Use this setting to alter the viewing angle to your liking from -1 to 0 to +1.

BRIGHT You can adjust the display brightness from between 1 to 16. You can also select different values for day and night.

Selecting the night bright- ness:

Switch on the vehicle lights and programme the bright- ness value. The car radio’s lighting connector must be hooked up to the vehicle’s electric system for this to function properly.

(Variocolour) For gradually matching the radio illumination with the dashboard lighting.

green

light orange

red

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS