Blaupunkt RCM 126 operating instructions Scantime, Aux

LED ON Here you can choose be- tween LED ON or LED OFF. With LED ON, the KeyCard tongue will flash for extra anti-theft protection when the unit has been switched off and the KeyCard re- moved.

LEARN KC To “train” a second Key- Card.

Please read the information

If you remove the KeyCard	The seek tuning sensitivity
during the reading process,	values can be separately set
“READ KC” will show on the	for AM and FM.
display panel. The unit con-
tinues to play but does not	CDC UPD Use this function to delete
accept any operations ex-
	CD names during CDC op-
cept from being switched
	eration, in order to have
off. Re-insert the card.
	more storage capacity for
	new discs available. See
PTY LANG To select the programme	“Deleting CD names with
type language:	DSC-UPDATE”.
DEUTSCH or ENGLISH

in chapter “KeyCard theft protection system - “Train- ing” a second KeyCard”.

READ KC To read out the KeyCard data.

The card supplied with the radio is used to display the model name, type number (7 6..) and the serial num- ber.

With the extra card it is pos-

SCANTIME	Use this function to set the
	scan time for the radio or
	CD player from between five
	and 30 seconds.
S-DX	To adjust the seek tuning
	sensitivity for distant recep-
	tion.
	DX 1	- high sensitivity
	DX 3	- low sensitivity

AUX	This menu item is not
	available if you have con-
	nected a CD changer (A 05
	or F 05).
	The setting made at the fac-
	tory is AUX OFF.
	If you have connected an
	external piece of equipment
	via AUX, this function must
	be set to AUX ON.

sible to display the Short Additional Memory (S.A.M.) data entered by your specia- lised dealer. See chapter “Short Additional Memory S.A.M.”.

S-LO	To adjust the seek tuning
	sensitivity for local recep-
	tion.
	LO 1	- high sensitivity
	LO 3	- low sensitivity

VOL FIX Use this function to select the volume at which the ra- dio is set when it is switched on. Adjust the desired volu- me level with << >>. When adjusted to “VOL 0”, the

50