Blaupunkt RCM 126 operating instructions Programme type, News

Page 16

PTY – Programme Type

PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their programme type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function.

Switching PTY on/off

Press PTY.

When the function is active, the programme type selected last will briefly appear in the display. “PTY” will be permanently indi- cated in the lower right corner of the display panel.

Programme type

Use << >> to have the last selected pro- gramme type displayed and to choose a new one.

You can select any one of the stored types with the preset buttons 1 - 6.

Condition: PTY must be active.

Using DSC you can choose between Ger- man and English (see “DSC programming - PTY LANG”).

All of the programme types listed below are available.

The letters printed in bold are identical to the actual short-time indication in the dis- play.

NEWS

CURRENT AFFAIRS

INFORMATION

SPORT

EDUCATE

DRAMA

CULTURE

SCIENCE

VARIED

POP MUSIC

ROCK MUSIC

M.O.R. M (middle of the road music) LIGHT M (light classical) CLASSICS (serious classical) OTHER M (other music)

PTY 16 to PTY 30 are not yet assigned.

Checking the programme type of the station

Press PTY for approximately two se- conds.

After the beep tone the display will show the programme type offered by the tuned in sta- tion.

If “NO PTY” appears in the display, the cur- rent station has no PTY code.

Displaying the selected programme type

Press << or >>.

The programme type selected last will be displayed briefly.

Selecting a programme type

a)Using the preset buttons

When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory.

Press one of the presets 1 - 6. The selected programme type will be displayed for two seconds.

If you wish to listen to a station with this PTY,

press / to start seek tuning ope- ration.

If the system is unable to find a station offe- ring the selected programme type, the dis- play will show “NO PTY” and a beep tone will be released. The station received be- fore starting seek tuning will be tuned in. You can assign different programme types to each preset position. Please refer to the next chapter “Storing programme types”.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

41

Image 16
Contents Heidelberg RCM Page Contents Quick reference Extra rocker switch functions Rocker switchAUD J GEO DSC Mode H PTY Display Flashing KeyCard tongueMIX MIX CDMIX MAG MIX OFF@ DIS Extra function GEO AUDImportant notes KeyCard theft protection system Removing the KeyCardReplacing a KeyCard Never pull out the KeyCard directlySwitching off the flashlight Short Additional Memory S.A.MTurn On Message T.O.M Optical indication for extra securityRadio operation with RDS Radio Data System Scrolling through the broad- casting networks Changing the memory bankStoring stations Automatically storing the stronSelecting the seek tuning sensi- tivity Preset ScanSwitching from stereo to mono Recalling stored stationsProgramme type NewsScanning stations with PTY-SCAN Storing programme typesPTY priority Automatic seek tuning start Switching the warning beep offReceiving traffic programme stations with RDS-EON On/offTape operation Switching the tape side Scanning cassette titles with Skipping unrecorded tapePortions with Blank Skip Dolby B NRSwitching to CDC operation CD changer operation optionalCare notes Selecting CDs and titlesSelecting the display mode Storing the display modeMIX playback Entering CD namesDSC programming Deleting CD names withColour Scantime AUXSpecifications Overview of the DSC factory settingsAppendix Blaupunkt-Werke GmbH
Related manuals
Manual 31 pages 21.97 Kb Manual 33 pages 27.68 Kb