Blaupunkt RCM 128 KeyCard theft protection system, Removing the KeyCard, Replacing a KeyCard

KeyCard theft protection system

This car radio is supplied with one KeyCard				ERR” will appear in the display. In this case		• Press << or >>.
as standard, though it can also be operated				please do not make any further adjustments.		The display will switch to “CHANGE”.
with a second card.				The system will switch	off after approxi-	• Push in the KeyCard. The card is re-
If you have lost your KeyCard or if it was				mately ten seconds.
						leased and put in the proper position
damaged, you can buy a new one from your				When inserting another	card type (e.g.
						for being removed.
specialised dealer.				phone or credit card), the display will show
						• Remove the first KeyCard and insert
When	using two KeyCards,	the	settings	“WRONG KC” for approximately two sec-
stored	on the first card will	be	adopted.	onds.		the new one while “CHANGE” is still
						being displayed.
However, you can individually store the fol-				Remove the wrong card and introduce the
						After the display indication “READY” or
lowing functions:				correct KeyCard.
Preset button assignments, bass, treble,				After the display indications “CARD ERR” “LEARN KC”,
balance and fader settings, Loudness, TA				or “WRONG KC”:		• press DSC.
(traffic announcement volume), beep vol-				• Press ON to turn on the set.		Now you can also use the new KeyCard for
ume.						operating your unit.
In addition, the settings activated before				Removing the KeyCard		A maximum of two cards can be used for
switching the radio off, such as the wave-				Never pull out the KeyCard directly!		the set.
band, station, TA priority, AF, REG ON/OFF,						When trying to “train” a third one, the ac-
SCANTIME, seek tuning sensitivity and VOL				• First, slightly push in the KeyCard.		cess authorisation for the KeyCard not used
FIX will also remained stored.				This releases the card and puts it in the		for the “training” process will be deleted
This ensures that you will find your basic				proper position for being removed.		automatically.
settings re-adjusted automatically as soon				• Now you can pull it out.
as you have inserted your KeyCard.				“Training” a second KeyCard/		Displaying the radio pass data
Putting the unit into operation						Using the KeyCard supplied with your set
				Replacing a KeyCard
						you can have the radio pass data such as
• Turn on the set.				While operating the unit with the first Key-		the model name, product number (7 6 ...)
Introduce the KeyCard into the slot				Card, you can “train” a second one to be		and serial number indicated on the display
with the contact area showing up				also used with the set:		panel.
(KeyCard tongue sticking out).				• Insert the first KeyCard and turn on the		Please refer to chapter “DSC programming
The car radio is now ready for operation.				set.		- READ KC”.

If a wrong KeyCard is inserted, then “CARD • Press the DSC button and select “LEARN KC” with /.

40