Blaupunkt 400 BT Inserting a CD, Connecting/removing a USB data carrier, Ejecting a CD

•If the connected CD changer first acquires the inserted CDs (e.g. after an interruption of the power supply or a change of the mag- azine), "MAG SCAN" is displayed. If the CD changer does not contain any CDs or maga- zine, "NO DISC" is displayed.

Inserting a CD

Note:

You must not hinder or assist the drive as it automatically draws in the CD.

￿Insert the CD with its printed side up into the CD tray 7until you feel a slight resistance.

The CD is automatically pulled in and its data are checked (the display shows "READING" during this time). Afterwards, the playback starts in CD or MP3 mode. If a CD is inserted, the display shows the CD symbol.

Note:

If the inserted CD cannot be played back, "CD ERROR" is briefly displayed and the CD is au- tomatically ejected after approx. 2 seconds.

Connecting/removing a USB data carrier

To be able to connect a USB data carrier, the sup- plied USB cable must be connected to the car sound system (see Installation Instructions).

￿Switch of the car sound system so that the data carrier will be correctly registered and unregistered.

￿Connect the USB data carrier to the USB cable or pull it off.

If a USB data carrier is connected, the display shows the USB symbol. If the USB data car- rier is initially selected as audio source after connecting it or after switching on the car sound system, the data are read in first (the display shows "READING" during this time).

Notes:

•If the connected USB data carrier cannot be seen, "USB ERROR" is briefly displayed.

•The time required for reading in the data depends on the design and size of the USB data carrier.

ENGLISH

Ejecting a CD

Notes:

•If a CD is ejected and not removed, the drive will automatically draw it back in again after approx. 10 seconds.

•You can also eject CDs while the car sound system is switched off or whilst another au- dio source is activated.

￿Press the button : to eject an inserted CD.

Selecting tracks

￿Briefly press the button 5/ > to change to the previous/next track.

Note:

If the current track plays longer than 3 sec- onds, pressing 5once restarts the track.

Select a folder/CD (only in MP3/ WMA/C‘n‘C or CD changer mode)

￿Press the button @/ 2to change to the previous/next folder or CD.

Note:

This also allows you to change between playlists of a device connected via C‘n‘C.