Blaupunkt 400 BT installation instructions Scan Time, Clock SET, Beep, Mute LVL, On Volume, Reg

SCAN TIME

Setting the scan time in 5-second increments. Settings: 5 – 30.

￿Press the button > to open the sub- menu.

￿Press the button @ / 2 to perform the setting.

CLOCK SET

Setting the time.

￿Press the button > to open the sub- menu.

￿Press the button 5/ > to change between minutes and hours.

The minute or hour display flashes if it is selected.

￿Press the button @/ 2to adjust the minutes or hours.

￿Briefly press the MENU•OK button ? to confirm the time entered.

Note:

In 12-hour mode (12H MODE), an "A" is dis- played after the time for the time before noon or a "P" for the time after noon.

12H/24H MODE

Selecting the 12 or 24-hour time. Settings: 12H, 24H.

￿Press the button > to open the sub- menu.

￿Press the button > to change between the settings.

CLOCK

Switching the display of time on or off with radio and vehicle ignition switched off. Settings: ON, OFF.

￿Press the button > to open the sub- menu.

￿Press the button > to change between the settings.

￿Briefly press the MENU•OK button ? to confirm the selected setting.

BEEP

Switching the confirmation beep on or off. Set- tings: ON, OFF.

￿Press the button > to open the sub- menu.

￿Press the button > to change between the settings.

￿Briefly press the MENU•OK button ? to confirm the selected setting.

MUTE LVL

Setting the volume for low volume. Settings: 0 - 50.

￿Press the button > to open the sub- menu.

￿Press the button @ / 2 or turn the volume control 4to perform the setting.

ON VOLUME

Setting the power-on volume Settings: 0 – 50 or LAST VOL (volume set last before switching off the car sound system). With the "LAST VOL" set- ting, the power-on volume is limited to max. 25.

￿Press the button > to select the setting "LAST VOL".

- or -

￿Press the button 5 to set the power-on volume between 0 and 50.

￿Press the button @ / 2 or turn the volume control 4to perform the setting.

REG

(only for tuner region "EUROPE")

Only possible in FM radio mode: Switching REG

function on or off. Settings: ON, OFF.

￿Press the button > to open the sub- menu.

￿Press the button > to change between the settings.